JB/T 11984-2014Wheel-end support axles for earth-moving machinery - Technical specifications (English PDF)
土方机械用轮边支承轴 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11984-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11984-2014 is the English-translated version of 土方机械用轮边支承轴 技术条件.
The recommended standard JB/T 11984-2014 states the technical specifications for the wheel-end support axle of earth-moving machinery. It classifies these support shafts and then sets the requirements for them, the test methods, the inspection rules, and the provisions on marking, packaging, transport and storage.
Its field of application is the wheel support shaft fitted to earth-moving machines. Quoted documents include GB/T 197-2003, GB/T 228.1, GB/T 230.1, GB/T 1184-1996, GB/T 3478.1-2008, GB/T 5617-2005, GB/T 13320-2007, JB/T 5936 and JB/T 6031.
It sits under the Chinese classification P97 and the international classification 53.100. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 11984-2014
National Standard of the People's Republic of China
- ICS
- 53.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Classifications and Groups
- 4.1 Types
- 5 Technical requirements
- 7 Test Methods
- 8 Inspection Rules
- 9 Marking, Packaging, Transportation and Storage
1 Foreword
JB/T 11984-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The recommended standard JB/T 11984-2014 states the technical specifications for the wheel-end support axle of earth-moving machinery. It classifies these support shafts and then sets the requirements for them, the test methods, the inspection rules, and the provisions on marking, packaging, transport and storage. Its field of application is the wheel support shaft fitted to earth-moving machines. Quoted documents include GB/T 197-2003, GB/T 228.1, GB/T 230.1, GB/T 1184-1996, GB/T 3478.1-2008, GB/T 5617-2005, GB/T 13320-2007, JB/T 5936 and JB/T 6031. It sits under the Chinese classification P97 and the international classification 53.100.
JB/T 11984-2014 falls under ICS 53.100, in the field of materials handling equipment.
This catalogue holds 232 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 228.1
GB/T 230.1
GB/T 231.1
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1958
GB/T 2101
GB/T 2829
GB/T 3478.1-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
GB/T 5617-2005 — Determination of effective depth of hardening after induction or flame hardening of steel
GB/T 6402
GB/T 13298
GB/T 13320-2007 — Metallographic grading atlas and assessing method for steel die forgings
GB/T 15822.1
JB/T 5936
JB/T 5947
JB/T 6031
JB/T 5942
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 8419-2023 — Earth-moving machinery - Laboratory evaluation of operator seat vibration
JB/T 8816-1998 — Construction machinery - Drive axles - Technical specifications
GB/T 13752-1992 — Design rules for tower cranes
JB/T 11985-2025 — Hydraulic Shears for Engineering Machinery
JB/T 11987-2014 — Road Construction and Maintenance Machinery and Equipment-Rail Form Concrete Paver
JB/T 11986-2014 — Concrete product machinery - Concrete block production lines
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 197-2003General purpose metric screw threads -- Tolerances
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
Similar standards
How to Download JB/T 11984-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13298-1991 — Metal. Inspection method of microstrcture
GB/T 13298-2015 — Inspection Methods of Microstructure for Metals
JB/T 11984-2014
$105.00