JB/T 11389-2013Technical specification for oilfield drilling mud pit solidification equipment (English PDF)
油田钻井泥浆坑固化设备技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11389-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11389-2013 is the English-translated version of 油田钻井泥浆坑固化设备技术规范.
JB/T 11389-2013 is a recommended Chinese machinery industry standard that serves as the technical specification for oilfield drilling mud pit solidification equipment.
It lays down the technical requirements for this curing equipment, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The equipment within its field is that used on the mud pits of oil drilling sites. Among the standards it quotes are GB/T 700-2006, GB/T 1220-2007, GB/T 3280-2007, GB/T 3797-2005, GB/T 4237-2007, GB 5226.1-2008, GB/T 7724-2008, GB/T 9089.2-2008 and GB/T 9142-2000.
Its Chinese classification number is J88 and its international classification number 13.030.40.
Found what you need?
Document preview — JB/T 11389-2013
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11389-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that serves as the technical specification for oilfield drilling mud pit solidification equipment. It lays down the technical requirements for this curing equipment, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The equipment within its field is that used on the mud pits of oil drilling sites. Among the standards it quotes are GB/T 700-2006, GB/T 1220-2007, GB/T 3280-2007, GB/T 3797-2005, GB/T 4237-2007, GB 5226.1-2008, GB/T 7724-2008, GB/T 9089.2-2008 and GB/T 9142-2000. Its Chinese classification number is J88 and its international classification number 13.030.40.
JB/T 11389-2013 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 700-2006 — Carbon structural steels
GB/T 1220-2007 — Stainless steel bars
GB/T 3280-2007 — Cold rolled stainless steel plate, sheet and strip
GB/T 3797-2005 — Electrical control assemblies
GB 4053.3-2009 — Safety requirements for fixed steel ladders and platforms - Part 3: Industrial guardrails and steel platforms
GB/T 4237-2007 — Hot rolled stainless steel plate, sheet and strip
GB 5083 - 1999 — General rules for designing the production facilities in accordance with safety and health requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 7724-2008 — Electronic weighing meter
GB/T 8923.2-2008 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
GB/T 9089.2-2008 — Electrical installations for outdoor Sites under heavy conditions - Part 2: General protection requirements
GB/T 9142-2000 — Concrete mixers
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 13306
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11396-2025 — Biomass power plant flue gas denitrification technology and equipment
JB/T 11391-2025 — Installation technical requirements and acceptance specifications for filter bags for bag filters
JB/T 11379-2013 — Solid-liquid separation equipment for night soil disposal stations
6 Classification and status
International classification (ICS): 13.030.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 700-2006Carbon structural steels
- GB/T 1220-2007Stainless steel bars
- GB/T 3280-2007Cold rolled stainless steel plate, sheet and strip
- GB/T 3797-2005Electrical control assemblies
- GB 4053.3-2009Safety requirements for fixed metal ladders and platform - Part 3: Industrial guardrails and platform
Similar standards
How to Download JB/T 11389-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4053.3-2009 — Safety requirements for fixed steel ladders and platforms - Part 3: Industrial guardrails and steel platforms
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 1220-2007 — Stainless steel bars
JB/T 11389-2013
$240.00