JB/T 11388-2013Technical Specification for Transfer Equipment of Oilfield Drilling Mud (English PDF)
油田钻井泥浆转运设备技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11388-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11388-2013 is the English-translated version of 油田钻井泥浆转运设备技术规范.
JB/T 11388-2013 is the Chinese machinery industry standard giving the technical specifications for the equipment that moves drilling mud and cuttings on an oilfield.
The equipment it addresses includes screw conveyors, cuttings boxes and cuttings bags. For that equipment the standard sets the models, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage.
Among the standards it quotes are GB/T 191-2008, GB/T 699-1999, GB/T 700-2006, GB/T 985.1-2008, GB/T 1184-1996, GB 2894-2008, GB/T 3274-2007, GB/T 3280-2007, GB/T 3768-1996, GB/T 4237-2007, GB 5226.1-2008, GB/T 6388-1986, GB/T 8923.2-2008, GB/T 8947-1998 and GB/T 9286-1998. Its classifications are J88 and 13.030.40.
Found what you need?
Document preview — JB/T 11388-2013
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11388-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard giving the technical specifications for the equipment that moves drilling mud and cuttings on an oilfield. The equipment it addresses includes screw conveyors, cuttings boxes and cuttings bags. For that equipment the standard sets the models, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage. Among the standards it quotes are GB/T 191-2008, GB/T 699-1999, GB/T 700-2006, GB/T 985.1-2008, GB/T 1184-1996, GB 2894-2008, GB/T 3274-2007, GB/T 3280-2007, GB/T 3768-1996, GB/T 4237-2007, GB 5226.1-2008, GB/T 6388-1986, GB/T 8923.2-2008, GB/T 8947-1998 and GB/T 9286-1998. Its classifications are J88 and 13.030.40.
JB/T 11388-2013 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 700-2006 — Carbon structural steels
GB/T 985.1-2008 — Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB 2894-2008 — Safety signs and guideline for the use
GB/T 3274-2007 — Hot-rolled plates and strips of carbon structural steels and high strength low alloy structural steels
GB/T 3280-2007 — Cold rolled stainless steel plate, sheet and strip
GB/T 3768-1996 — Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GB/T 4237-2007 — Hot rolled stainless steel plate, sheet and strip
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388-1986 — Transport package shipping mark
GB/T 8923.2-2008 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
GB/T 8947-1998 — Composite plastic woven sack
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
GB/T 9439-2010 — Grey iron castings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11396-2025 — Biomass power plant flue gas denitrification technology and equipment
JB/T 11391-2025 — Installation technical requirements and acceptance specifications for filter bags for bag filters
JB/T 11378-2013 — Replaceable boneless aeration tubes
6 Classification and status
International classification (ICS): 13.030.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 699-1999Quality carbon structure steels
- GB/T 700-2006Carbon structural steels
- GB/T 985.1-2008Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB 2894-2008Safety colours and safety signs
Similar standards
How to Download JB/T 11388-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2894-2008 — Safety signs and guideline for the use
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
JB/T 11388-2013
$180.00