JB/T 11206-2011Silicon piezoresistive miniature and thin pressure sensors (English PDF)
硅压阻式微型、薄型压力传感器
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11206-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 11206-2011 is the English-translated version of 硅压阻式微型、薄型压力传感器.
JB/T 11206-2011 is a recommended Chinese machinery industry standard on silicon piezoresistive pressure sensors of the miniature and thin types.
It lays down the terms and definitions, the product types, the basic parameters, the requirements, the test methods, the inspection rules and the provisions covering marking, packaging, transport and storage.
The standard is written to serve the manufacture, the use and the acceptance of these sensors. Among the standards it quotes are GB/T 2423.1-2008, GB/T 2423.10-2008, GB/T 7665-2005, GB/T 7666-2005, GB/T 13384-2008, JJG 624-2005 and JB/T 6172-2005.
The sensors fall under the Chinese classification N11 and the international classification 17.100.
Found what you need?
Document preview — JB/T 11206-2011
National Standard of the People's Republic of China
- ICS
- 17.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11206-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 18 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on silicon piezoresistive pressure sensors of the miniature and thin types. It lays down the terms and definitions, the product types, the basic parameters, the requirements, the test methods, the inspection rules and the provisions covering marking, packaging, transport and storage. The standard is written to serve the manufacture, the use and the acceptance of these sensors. Among the standards it quotes are GB/T 2423.1-2008, GB/T 2423.10-2008, GB/T 7665-2005, GB/T 7666-2005, GB/T 13384-2008, JJG 624-2005 and JB/T 6172-2005. The sensors fall under the Chinese classification N11 and the international classification 17.100.
JB/T 11206-2011 falls under ICS 17.100, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 2423.5-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.10-2008 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 2423.15-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady
GB/T 2423.22-2002 — Environmental testing - Part 2: Test methods - Test N: Change of temperature
GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 7665-2005 — General terminology for transducers
GB/T 7666-2005 — Nomenclature and code for transducers
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 15478
JJG 624-2005 — Verification Regulation of Dynamic Pressure Transducers
JB/T 6172-2005 — Type spectrum of pressure sensor series
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 18 pages
5 Related standards
Standards on related subjects:
GB/T 20730.2-2019 — Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
GB/T 15478-2015 — Test methods of the performances for pressure transducer/sensor
GB/T 19146-2010 — Infrared devices for instant screening of human skin temperature
JB/T 14355-2023 — Tungsten-rhenium alloy thermocouple wire for the temperature measurement of the engine exhaust plume
JB/T 13390-2018 — Infrared line scanning thermometers
JB/T 13359-2018 — Silicon resonant pressure sensors
6 Classification and status
International classification (ICS): 17.100
Chinese Standard Classification (CCS): N 11
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.5-1995Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.10-2008Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
- GB/T 2423.15-2008Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady
Similar standards
How to Download JB/T 11206-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 15478-1995 — Test methods of the performances for pressure transducer/sensor
GB/T 15478-2015 — Test methods of the performances for pressure transducer/sensor
JB/T 11206-2011
$315.00