GB/T 28855-2012Silicon-based pressure sensors (English PDF)
硅基压力传感器
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28855-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 5, 2012
Implementation date
February 15, 2013
Scope
GB/T 28855-2012 is the English-translated version of 硅基压力传感器.
GB/T 28855-2012 is the Chinese standard "Silicon-based pressure sensors".
Its scope clause reads: This standard specifies the silicon pressure sensor (hereinafter referred to as sensors) terms and definitions, classification and nomenclature, basic parameters, requirements, testing Methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the silicon pressure sensor. Its clauses include terms and definitions; classification and nomenclature.
Found what you need?
Document preview — GB/T 28855-2012
National Standard of the People's Republic of China
- ICS
- 17.100
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and Nomenclature
- 4.1 Category
- 4.2 model name and graphic symbols
- 5.1 Measuring range
- 5.2 Operating temperature range
- 5.3 Temperature compensation range
- 5.5 Materials in contact with the measured medium
- 5.6 Incentive
- 6 Requirement
- 6.1 Technical conditions (detailed specification)
- 6.2 External connectivity
- 6.3 electrical performance
- 6.5 Stability
- 6.6 Temperature on
- 6.7 Overload
- 6.8 static pressure effects
- 6.9 Dynamic Performance
- 6.10 environmental performance
- 6.11 Fatigue Life
- 7 Test methods
- 7.1 Environmental conditions
- 7.2 Test preparation before
- 7.3 External Connectivity
- 8 7.4 Electrical Performance
- 7.6 STABILITY
- 7.7 temperature
- 7.8 Overload
- 7.9 static pressure effects
- 7.10 Dynamic Performance
- 7.11 environmental performance
- 7.12 Fatigue Life
- 8 Inspection Rules
- 8.1 Inspection classification
- 8.2 factory inspection
- 8.3 Type inspection
- 9 signs, packaging, transportation and storage
- 9.1 Product Marking
- 9.2 Packaging, transportation and storage
1 Scope
This standard specifies the silicon pressure sensor (hereinafter referred to as sensors) terms and definitions, classification and nomenclature, basic parameters, requirements, testing
Methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the silicon pressure sensor.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.15-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ga and guidance. Acceleration, steady
GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test J and guidance. Mould growth
GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt
GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 7665-2005 sensor generic term
GB/T 7666-2005 and sensor nomenclature codes
GB/T 14479 sensor Graphical symbols
GB/T 17626.1-2006 Electromagnetic compatibility - Testing and measurement techniques - Overview of immunity tests
GB/T 18459-2001 sensor is mainly static performance index calculation method
JJG624-2005 dynamic pressure sensor
3 Terms and Definitions
GB/T 7665-2005 and defined the following terms and definitions apply to this document.
3.1
Silicon or silicon composite material as the basic material, the pressure-sensitive device can be implemented independently of the measurement function (or components) sensor configuration.
4 Classification and Nomenclature
4.1 Classification
4.1.1 Sensor Output Signal Type
Press sensor output signal types can be divided into.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28855-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 28855-2012
$435.00