GB/T 26807-2011Silicon piezoresistive dynamic pressure sensors (English PDF)
硅压阻式动态压力传感器
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26807-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26807-2011 is the English-translated version of 硅压阻式动态压力传感器.
GB/T 26807-2011 is the Chinese standard "Silicon piezoresistive dynamic pressure sensors". Its scope clause reads: This standard specifies the classification and naming of silicon piezoresistive pressure sensor dynamic, basic parameters, requirements, test methods, inspection rules and standard Chi, packaging, transport and storage.
This standard applies to dynamic silicon piezoresistive pressure sensor (hereinafter referred to as sensors) the production, use, and acceptance. Its clauses include classification and nomenclature.
Found what you need?
Document preview — GB/T 26807-2011
National Standard of the People's Republic of China
- ICS
- 17.100
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Classification and Nomenclature
- 3.1 Category
- 3.2 model name and graphic symbols
- 4 Basic parameters
- 4.1 Measuring range
- 4.2 measured pressure medium and compatibility
- 4.3 Incentive
- 4.4 nominal bridge resistance
- 4.5 Working medium temperature range
- 4.6 Operating ambient temperature range
- 4.7 Temperature compensation range
- 4.8 Storage temperature range
- 5 Requirement
- 5.1 General
- 5.2 Appearance
- 5.3 Outline and installation size
- 5.4 Input impedance
- 5.5 output impedance
- 5.6 load impedance
- 5.7 Insulation Resistance
- 5.8 dielectric strength
- 5.10 Overload
- 5.11 Zero Drift
- 5.12 Thermal zero drift
- 5.14 zero long-term stability (if necessary)
- 5.16 Environmental Impact Characteristics
- 5.17 fatigue life (if necessary)
- 6.1 Environmental conditions
- 6.2 calibration conditions
- 6.3 Exterior
- 6.4 Outline and installation size
- 6.5 Input impedance
- 6.6 output impedance
- 6.7 load impedance
- 6.8 Insulation resistance
- 6.9 Dielectric Strength
- 6.10 static performance
- 6.17 Environmental Impact Test
- 6.18 Fatigue Life
- 7 Inspection rules
- 7.1 Inspection classification
- 7.2 factory inspection
- 7.3 Type inspection
- 8 signs, packaging, transportation and storage
- 11 8.1 Product Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
1 Scope
This standard specifies the classification and naming of silicon piezoresistive pressure sensor dynamic, basic parameters, requirements, test methods, inspection rules and standard
Chi, packaging, transport and storage.
This standard applies to dynamic silicon piezoresistive pressure sensor (hereinafter referred to as sensors) the production, use, and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-
1.2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-
2.2007, IDT)
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT)
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987)
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)
GB/T 2423.15-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ga and guidance. Acceleration, steady state
Degree (IEC 60068-2-7. 1986, IDT)
GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984IDT)
GB/T 2829-2002 period inspection Sampling procedures and tables (suitable for process stability test)
GB/T 7666-2005 and sensor nomenclature code
GB/T 14479 sensor Graphical symbols
GB/T 15478 pressure sensor performance test method
JJG624-2005 dynamic pressure sensor
3 Classification and Nomenclature
3.1 Classification
Divided by feelings of pressure type. gauge pressure, absolute pressure, differential pressure.
3.2 model name and graphic symbols
Sensor model name, according to the provisions of GB/T 7666-2005 named.
Graphical symbols sensor, according to GB/T 14479 requirements.
GB/T 20730.2-2019 | GB/T 15478-2015 | GB/T 19146-2010 | GB/T 48052-2026 | GB/T 48051-2026 | GB/T 30121-2026 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26807-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26807-2011
$295.00