JB/T 10930-2010Class 200 corona-resistant enamelled round copper wires (English PDF)
200级耐电晕漆包铜圆线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10930-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 14, 2010
Implementation date
October 1, 2010
Scope
JB/T 10930-2010 is the English-translated version of 200级耐电晕漆包铜圆线.
JB/T 10930-2010 is a recommended Chinese machinery industry standard for class 200 corona-resistant enamelled round copper wires. It sets out how these wires are classified, the technical requirements they must meet, the test methods applied to them, the inspection rules and the requirements for packaging.
The product covered is corona-resistant enamelled round copper wire of heat class 200. Among the standards it quotes are GB/T 4074.1-2008, GB/T 4074.2-2008, GB/T 4074.3-2008, GB/T 4074.4-2008, GB/T 4074.5-2008, GB/T 4074.6-2008, GB/T 6109.1-2008 and GB/T 6109.20-2008.
The wire is filed under the Chinese classification K12 and the international classification 29.060.10, and the issuing body named in the catalogue is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 10930-2010
National Standard of the People's Republic of China
- ICS
- 29.060.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10930-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 May 2010 and has been in force since 1 October 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for class 200 corona-resistant enamelled round copper wires. It sets out how these wires are classified, the technical requirements they must meet, the test methods applied to them, the inspection rules and the requirements for packaging. The product covered is corona-resistant enamelled round copper wire of heat class 200. Among the standards it quotes are GB/T 4074.1-2008, GB/T 4074.2-2008, GB/T 4074.3-2008, GB/T 4074.4-2008, GB/T 4074.5-2008, GB/T 4074.6-2008, GB/T 6109.1-2008 and GB/T 6109.20-2008. The wire is filed under the Chinese classification K12 and the international classification 29.060.10, and the issuing body named in the catalogue is the Ministry of Industry and Information Technology.
JB/T 10930-2010 falls under ICS 29.060.10, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 4074.1-2008 — Winding wires - Test methods - Part 1: General
GB/T 4074.2-2008 — Winding wires - Test methods - Part 2: Determination of dimensions
GB/T 4074.3-2008 — Winding wires -- Test methods -- Part 3: Mechanical properties
GB/T 4074.4-2008 — Winding wires - Test methods - Part 4: Chemical properties
GB/T 4074.5-2008 — Winding wires - Test methods - Part 5: Electrical properties
GB/T 4074.6-2008 — Winding wires - Test methods - Part 6: Thermal properties [including MODIFICATION 1]
GB/T 6109.1-2008 — Enamelled round winding wire - Part 1: General requirements [including MODIFICATION 1]
GB/T 6109.20-2008 — Enamelled round winding wire -- Part 20: Polyester on polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 6109.5-2008 — Enamelled round winding wire - Part 5: Polyesterimide enamelled round copper wire, class 180
GB/T 7095.1-2008 — Enamelled rectangular copper winding wires -- Part 1: General requirements
JB/T 6758.4-2007 — Continuously transposed conductors - Part 4: Heat resistant continuously transposed conductors of enamelled copper wires
JB/T 15240-2025 — Corona-resistant enameled copper round wire for oil-cooled motor
JB/T 4014.2-2013 — Winding wires for submersible motors - Part 2: Polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 450/750V
JB/T 4014.1-2013 — Winding wires for submersible motors - Part 1: General requirements
6 Classification and status
International classification (ICS): 29.060.10
Chinese Standard Classification (CCS): K 12
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4074.1-2008Test methods of winding wires - Part 1: General
- GB/T 4074.2-2008Test methods of winding wires - Part 2: Determination of dimensions
- GB/T 4074.3-2008Test methods of winding wires-Part 3: Mechanical properties
- GB/T 4074.4-2008Test methods of winding wires - Part 4: Chemical properties
- GB/T 4074.5-2008Test methods of winding wires - Part 5: Electrical properties
- GB/T 4074.6-2008Test methods of winding wires - Part 6: Thermal properties
Similar standards
How to Download JB/T 10930-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4074.1-2008 — Winding wires - Test methods - Part 1: General
GB/T 4074.2-2008 — Winding wires - Test methods - Part 2: Determination of dimensions
GB/T 4074.3-2008 — Winding wires -- Test methods -- Part 3: Mechanical properties
JB/T 10930-2010
$209.00