JB/T 10667-2016Miniature voltage transformers for electricity meters (English PDF)
电能表用微型电压互感器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10667-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 5, 2016
Implementation date
September 1, 2016
Scope
JB/T 10667-2016 is the English-translated version of 电能表用微型电压互感器.
The miniature voltage transformers built into electricity meters are the subject of JB/T 10667-2016, a recommended Chinese machinery industry standard.
It sets out terms and definitions, standard power values, mechanical requirements, climatic conditions, electrical requirements and accuracy classes for these transformers, and adds the inspection rules and the provisions for marking, packaging, transport and storage.
It applies to miniature voltage transformers used in fixed electricity meters on networks at 50 Hz or 60 Hz where the voltage does not exceed 600 V RMS, and to transformers used in other instruments under those same conditions.
It replaces JB/T 10667-2006. Among the standards it quotes are GB/T 2423.10, GB/T 16927.1-2011, GB/T 17215.211-2006 and GB 20840.1-2010.
Found what you need?
Document preview — JB/T 10667-2016
National Standard of the People's Republic of China
- ICS
- 17.220.20
- Replacing
- JB/T 10667-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10667-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 April 2016 and has been in force since 1 September 2016.
It replaces the earlier edition JB/T 10667-2006.
2 Scope
The miniature voltage transformers built into electricity meters are the subject of JB/T 10667-2016, a recommended Chinese machinery industry standard. It sets out terms and definitions, standard power values, mechanical requirements, climatic conditions, electrical requirements and accuracy classes for these transformers, and adds the inspection rules and the provisions for marking, packaging, transport and storage. It applies to miniature voltage transformers used in fixed electricity meters on networks at 50 Hz or 60 Hz where the voltage does not exceed 600 V RMS, and to transformers used in other instruments under those same conditions. It replaces JB/T 10667-2006. Among the standards it quotes are GB/T 2423.10, GB/T 16927.1-2011, GB/T 17215.211-2006 and GB 20840.1-2010.
3 Normative references
JB/T 10667-2016 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2423.10
GB/T 2423.17
GB/T 2829-2002
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 16927.1-2011 — High-voltage test techniques -- Part 1: General definitions and test requirements
GB/T 17215.211-2006
GB 20840.1-2010 — Instrument transformers - Part 1: General technical requirements
GB 20840.3-2013 — Instrument transformers -- Part 3: Additional requirements for inductive voltage transformers
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10667-2006 (earlier edition)
6 Classification and status
International classification (ICS): 17.220.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.10Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
- GB/T 2423.17Environmental testing - Part 2: Test methods - Test Ka: Salt mist
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 13384-2008General specifications for packing of mechanical and electrical product
- GB/T 16927.1-2011High-voltage test techniques -- Part 1: General definitions and test requirements
- GB/T 17215.211-2006Electricity metering equipment(AC) - General requirements, tests and test conditions - Part 11: Metering equipment
Similar standards
Editions of JB/T 10667
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10667-2016 | Miniature voltage transformers for electricity meters | current edition | Current |
| JB/T 10667-2006 | Miniature voltage transformers for electricity meters | previous edition | Superseded |
This page sells the current edition, JB/T 10667-2016. Earlier editions are listed for reference only.
How to Download JB/T 10667-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20840.1-2010 — Instrument transformers - Part 1: General technical requirements
GB 20840.3-2013 — Instrument transformers -- Part 3: Additional requirements for inductive voltage transformers
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
Secure payment via Stripe
Payments accepted
JB/T 10667-2016
$379.00