JB/T 10005-2012Micrometers with small measuring faces (English PDF)
小测头千分尺
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10005-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 10005-2012 is the English-translated version of 小测头千分尺.
Micrometers with small measuring faces, also called small anvil micrometers, are covered by JB/T 10005-2012, a recommended Chinese machinery industry standard.
JB/T 10005-2012 sets out the terms and definitions for these micrometers, their types and basic parameters, the requirements they must meet, the test methods, the inspection criteria and inspection methods, and the marking and packaging.
It applies to instruments with a graduation value of 0.01 mm. The Chinese classification is J42 and the international classification 17.040.30. Among the standards it quotes are GB/T 1216-2004, GB 4208-2008, GB/T 17163-2008, GB/T 17626.3-2006 and GB/T 20919-2007.
The document supersedes JB/T 10005-1999 and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 10005-2012
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Replacing
- JB/T 10005-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10005-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition JB/T 10005-1999.
2 Scope
Micrometers with small measuring faces, also called small anvil micrometers, are covered by JB/T 10005-2012, a recommended Chinese machinery industry standard. JB/T 10005-2012 sets out the terms and definitions for these micrometers, their types and basic parameters, the requirements they must meet, the test methods, the inspection criteria and inspection methods, and the marking and packaging. It applies to instruments with a graduation value of 0.01 mm. The Chinese classification is J42 and the international classification 17.040.30. Among the standards it quotes are GB/T 1216-2004, GB 4208-2008, GB/T 17163-2008, GB/T 17626.3-2006 and GB/T 20919-2007. The document supersedes JB/T 10005-1999 and was issued by the Ministry of Industry and Information Technology.
3 Normative references
JB/T 10005-2012 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1216-2004
GB/T 2423.3-2006
GB/T 2423.22-2002
GB 4208-2008
GB/T 17163-2008
GB/T 17164-2008
GB/T 17626.2-2006
GB/T 17626.3-2006
GB/T 20919-2007
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10005-1999 (earlier edition)
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1216-2004External micrometer
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.22-2002Environmental testing - Part 2: Test methods - Test N: Change of temperature
- GB/T 17163-2008Glossary of terms for dimensional measuring instruments - General terms
- GB/T 17164-2008Glossary of terms for dimensional measuring instruments - Product terms
- GB/T 17626.2-2006Electromagnetic compatibility -- Testing and measurement techniques -- Electrostatic discharge immunity test
GB 4208-2008
Similar standards
Editions of JB/T 10005
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10005-2012 | Micrometers with small measuring faces | current edition | Current |
| JB/T 10005-1999 | Micrometers with small measuring faces | previous edition | Superseded |
This page sells the current edition, JB/T 10005-2012. Earlier editions are listed for reference only.
How to Download JB/T 10005-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1216-2004 — External micrometer
GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms
GB/T 17164-2008 — Glossary of terms used in dimensional measuring instruments - Product terms
Secure payment via Stripe
Payments accepted
JB/T 10005-2012
$339.00