JB/T 10007-2012Large external micrometers (measuring range 1000 mm to 3000 mm) (English PDF)
大外径千分尺（测量范围为1000mm～3000mm）
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10007-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 10007-2012 is the English-translated version of 大外径千分尺（测量范围为1000mm～3000mm）.
Large external micrometers for the measuring range 1000 mm to 3000 mm are covered by JB/T 10007-2012, a recommended Chinese machinery industry standard.
The document gives the terms and definitions for these micrometers, their types and basic parameters, the requirements they must meet, the checking conditions and inspection methods, and the marking and packaging provisions.
JB/T 10007-2012 applies to instruments with a graduation value of 0.01 mm. It is classified J42 in the Chinese scheme and 17.040.30 in the international one. Among the standards it quotes are GB/T 1216-2004, GB/T 1219-2008, GB/T 1800.2-2009, GB/T 17163-2008 and GB/T 17164-2008.
It supersedes JB/T 10007-1999. The Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 10007-2012
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Replacing
- JB/T 10007-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10007-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition JB/T 10007-1999.
2 Scope
Large external micrometers for the measuring range 1000 mm to 3000 mm are covered by JB/T 10007-2012, a recommended Chinese machinery industry standard. The document gives the terms and definitions for these micrometers, their types and basic parameters, the requirements they must meet, the checking conditions and inspection methods, and the marking and packaging provisions. JB/T 10007-2012 applies to instruments with a graduation value of 0.01 mm. It is classified J42 in the Chinese scheme and 17.040.30 in the international one. Among the standards it quotes are GB/T 1216-2004, GB/T 1219-2008, GB/T 1800.2-2009, GB/T 17163-2008 and GB/T 17164-2008. It supersedes JB/T 10007-1999. The Ministry of Industry and Information Technology issued it.
3 Normative references
JB/T 10007-2012 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1216-2004
GB/T 1219-2008 — Dial gauges
GB/T 1800.2-2009
GB/T 17163-2008
GB/T 17164-2008
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10007-1999 (earlier edition)
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1216-2004External micrometer
- GB/T 1219-2008Dial gauges
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB/T 17163-2008Glossary of terms for dimensional measuring instruments - General terms
- GB/T 17164-2008Glossary of terms for dimensional measuring instruments - Product terms
Similar standards
Editions of JB/T 10007
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10007-2012 | Large external micrometers (measuring range 1000 mm to 3000 mm) | current edition | Current |
| JB/T 10007-1999 | Large external micrometers (measuring range 1000 mm to 3000 mm) | previous edition | Superseded |
This page sells the current edition, JB/T 10007-2012. Earlier editions are listed for reference only.
How to Download JB/T 10007-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1216-2004 — External micrometer
GB/T 1219-2008 — Dial gauges
GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms
Secure payment via Stripe
Payments accepted
JB/T 10007-2012
$115.00