Valid

HG/T 4403-2012Air pressure inspection machines for retreaded tyres (English PDF)

翻新轮胎气压检查机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4403-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

HG/T 4403-2012 is the English-translated version of 翻新轮胎气压检查机.

The subject of HG/T 4403-2012 is the air pressure inspection machine used on retreaded tyres.

This recommended chemical industry standard sets the terminology and definitions, the model designation and basic parameters, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage, and it covers the checking of tyres under air pressure.

Chinese classification G95 and international classes 71.120 and 83.200 group it with equipment for the rubber industry. Among the standards it cites are GB/T 191, GB 4208, GB 5226.1, GB/T 6326, GB/T 7932, GB/T 8196, GB/T 9969, GB/T 12783, GB/T 18831, GB/T 24342, HG/T 2108, HG/T 3120 and HG/T 3228. Issued on 28 December 2012, it has applied since 1 June 2013.

Found what you need?

Document preview — HG/T 4403-2012

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4403-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

The subject of HG/T 4403-2012 is the air pressure inspection machine used on retreaded tyres. This recommended chemical industry standard sets the terminology and definitions, the model designation and basic parameters, the requirements, the testing, the inspection rules and the provisions for marking, packaging, transport and storage, and it covers the checking of tyres under air pressure. Chinese classification G95 and international classes 71.120 and 83.200 group it with equipment for the rubber industry. Among the standards it cites are GB/T 191, GB 4208, GB 5226.1, GB/T 6326, GB/T 7932, GB/T 8196, GB/T 9969, GB/T 12783, GB/T 18831, GB/T 24342, HG/T 2108, HG/T 3120 and HG/T 3228.

HG/T 4403-2012 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 191

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 6326-2005 — Tyre terms and definitions

GB/T 6388

GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems

GB/T 8196-2003 — Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards

GB/T 9969

GB/T 12783 -2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery

GB/T 13306

GB/T 13384

GB/T 18831

GB/T 24342

GB/T 24343

GB/T 24344

HG/T 2108

HG/T 3120

HG/T 3223

HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 4405-2012 — Press building machines for solid tyres

HG/T 4404-2012 — Steel cord fabric cutting machines

HG/T 4402-2012 — Motorcycle tyre building machines with turn-up bladder

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download HG/T 4403-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4403-2012

$135.00