GB/T 5170.10-2017Inspection methods for environmental testing equipments—Part 10: Combined high and low temperature/low air pressure testing equipments (English PDF)
环境试验设备检验方法 第10部分：高低温低气压试验设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5170.10-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 5170.10-2017 is the English-translated version of 环境试验设备检验方法 第10部分：高低温低气压试验设备.
GB/T 5170.10-2017 is the Chinese standard "Inspection methods for environmental testing equipments—Part 10: Combined high and low temperature/low air pressure testing equipments".
Its scope clause reads: GB/T 5170 provisions of this part of the high and low temperature and pressure (including low pressure, low temperature and low pressure and high temperature and low pressure) test equipment (the following Referred to as "equipment") test items, test equipment and requirements, test load, test conditions, test methods, test results, test cycles content.
This section applies to the GB/T 2423.21, GB/T 2423.25 and GB/T 2423.26 test equipment used. This section also applies to the inspection of similar equipment. Its clauses include terms and definitions; test items; comprehensive test low pressure deviation.
Found what you need?
Document preview — GB/T 5170.10-2017
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- K 04
- Replacing
- GB/T 5170.10-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 test items
- 5 test equipment and requirements
- 6 test load
- 7 test conditions
- 8 test methods
- 9 test results
- 10 inspection cycle
1 Scope
GB/T 5170 provisions of this part of the high and low temperature and pressure (including low pressure, low temperature and low pressure and high temperature and low pressure) test equipment (the following
Referred to as "equipment") test items, test equipment and requirements, test load, test conditions, test methods, test results, test cycles content.
This section applies to the GB/T 2423.21, GB/T 2423.25 and GB/T 2423.26 test equipment used.
This section also applies to the inspection of similar equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.21 Environmental testing for electric and electronic products Part 2. Test methods Test M. Low pressure
GB/T 2423.25 Environmental testing for electric and electronic products Part 2. Test methods Test Z/AM. Low temperature/low pressure synthesis test
GB/T 2423.26 Environmental testing for electric and electronic products Part 2. Test methods Test Z/BM. High temperature/low pressure synthesis test
GB/T 5170.1-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 1. General
Environmental Noise Emission Standards for Industrial Enterprises
3 Terms and definitions
GB/T 5170.1-2016 Terms and definitions apply to this document.
4 test items
This part of the test items in Table 1.
Table 1 test items
Serial number test items
1 low pressure deviation
2 low pressure indicating error
3 low pressure rate of change
4 comprehensive test temperature deviation
5 comprehensive test low pressure deviation
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 5170.10
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5170.10-2017 | Inspection methods for environmental testing equipments—Part 10: Combined high and low temperature/low air pressure testing equipments | current edition | Current |
| GB/T 5170.10-2008 | Inspection methods for environmental testing equipments—Part 10: Combined high and low temperature/low air pressure testing equipments | previous edition | Superseded |
This page sells the current edition, GB/T 5170.10-2017. Earlier editions are listed for reference only.
How to Download GB/T 5170.10-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5170.1-2016 — Inspection methods for environmental testing equipments for electric and electronic products—Part 1: General
GB/T 5170.11-2017 — Inspection methods for environmental testing equipments—Part 11: Corrosive gas testing equipments
GB/T 5170.13-2018 — Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test
Secure payment via Stripe
Payments accepted
GB/T 5170.10-2017
$205.00