Valid

HG/T 3539-2012Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method (English PDF)

工业循环冷却水中铁含量的测定 邻菲啰啉分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3539-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2012

Implementation date

March 1, 2013

Scope

HG/T 3539-2012 is the English-translated version of 工业循环冷却水中铁含量的测定 邻菲啰啉分光光度法.

HG/T 3539-2012 is the Chinese chemical industry standard, of recommended status, that describes how low levels of iron in industrial circulating cooling water are determined by spectrometry with 1,10-phenanthroline.

Total iron, soluble iron and ferrous iron are all covered by it. The method is written for iron contents between 5 µg/L and 50 µg/L, and it extends to boiler water as well.

GB/T 602-2002 and GB/T 6682-2008 are its normative references. It replaces HG/T 3539-2003, one of a group of cooling water methods revised together. Issued on 7 November 2012, it has applied since 1 March 2013.

Found what you need?

Document preview — HG/T 3539-2012

National Standard of the People's Republic of China

ICS
71.040.40
Replacing
HG/T 3539-2003

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3539-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.

It replaces the earlier edition HG/T 3539-2003, HG/T 3539-1990.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard, of recommended status, that describes how low levels of iron in industrial circulating cooling water are determined by spectrometry with 1,10-phenanthroline. Total iron, soluble iron and ferrous iron are all covered by it. The method is written for iron contents between 5 µg/L and 50 µg/L, and it extends to boiler water as well. GB/T 602-2002 and GB/T 6682-2008 are its normative references. It replaces HG/T 3539-2003, one of a group of cooling water methods revised together.

HG/T 3539-2012 falls under ICS 71.040.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

4 Where this standard sits

It cites 2 standards, among them GB/T 602-2002, GB/T 6682-2008, listed in full above.

One other standard in this catalogue cites it: HY/T 163-2013.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

HG/T 3539-2003 (earlier edition)

HG/T 3539-1990 (earlier edition)

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples

HG/T 3532-2011 — Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products

HG/T 3531-2011 — Industrial circulating cooling water - Determination of water content in sludge and corrosion products

7 Classification and status

International classification (ICS): 71.040.40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3539

EditionTitleRevisionStatus
HG/T 3539-2012Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric methodcurrent editionCurrent
HG/T 3539-2003Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric methodprevious editionSuperseded

This page sells the current edition, HG/T 3539-2012. Earlier editions are listed for reference only.

How to Download HG/T 3539-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3539-2012

$115.00