Valid

HG/T 2797.5-2007Silica-alumina carbon black - Part 5: Inspection of impurities (English PDF)

硅铝炭黑 第5部分:杂质的检查

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2797.5-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 22, 2007

Implementation date

April 1, 2008

Scope

HG/T 2797.5-2007 is the English-translated version of 硅铝炭黑 第5部分:杂质的检查.

HG/T 2797.5-2007 is the fifth part of the Chinese chemical industry series on silica-alumina carbon black and deals with the inspection of impurities. It describes how non-black matter is screened out of the fraction that passes an 850 µm sieve, and it applies to the various grades of silica-alumina carbon black.

The sieves are those of GB/T 6003.1 and the part is used alongside HG/T 2880. It takes the place of HG/T 2797.5-1996, the matching part of the earlier edition of the series, and it carries the Chinese classification G49. Issued on 22 September 2007, it has applied since 1 April 2008.

Found what you need?

Document preview — HG/T 2797.5-2007

National Standard of the People's Republic of China

ICS
83.040.30
Replacing
HG/T 2797.5-1996

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 2797.5-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 September 2007 and has been in force since 1 April 2008.

It replaces the earlier edition HG/T 2797.5-1996.

It is one of 13 parts of the HG/T 2797 series.

2 Scope Preview

This standard is the fifth part of the Chinese chemical industry series on silica-alumina carbon black and deals with the inspection of impurities. It describes how non-black matter is screened out of the fraction that passes an 850 µm sieve, and it applies to the various grades of silica-alumina carbon black. The sieves are those of GB/T 6003.1 and the part is used alongside HG/T 2880. It takes the place of HG/T 2797.5-1996, the matching part of the earlier edition of the series, and it carries the Chinese classification G49.

HG/T 2797.5-2007 falls under ICS 83.040.30, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 6003.1

HG/T 2880

4 Where this standard sits

It cites 2 standards, listed in full above.

It is one part of the HG/T 2797 series, of which this catalogue holds 13 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

HG/T 2797.1-1996 — Determination of carbon aluminosilicate sieve residue

HG/T 2797.1-2007 — Part 1: Determination of sieve residue - Water flush method

HG/T 2797.2-1996 — Determination of iodine value of aluminosilicate carbon absorption

HG/T 2797.2-2007 — Part 2: Determination of iodine adsorption number

HG/T 2797.3-1996 — Determination of carbon aluminosilicate dibutyl phthalate absorption values

HG/T 2797.3-2007 — Part 3: Determination of dibutyl phthalate absorption number

HG/T 2797.4-1996 — Determination of pH of the carbon black aluminosilicate

HG/T 2797.4-2007 — Part 4: Determination of pH value

HG/T 2797.6-1996 — Determine the density of Si-Al black pour

HG/T 2797.6-2007 — Part 6: Determination of pour density

HG/T 2797.7-1996 — Determination of carbon heating loss of aluminosilicate

HG/T 2797.7-2007 — Part 7: Determination of heating loss

Other editions:

HG/T 2797.5-1996 (earlier edition)

Standards on related subjects:

HG/T 5459-2018 — Pyrolysis carbon black from waste tyres

GB/T 3780.10-2017 — Carbon black -- Part 10: Determination of ash

GB/T 3780.1-2015 — Carbon black—Part 1: Test method for iodine adsorption number

HG/T 3062-2023 — Rubber compounding ingredients - Precipitated hydrated silica - Determination of silica content

HG/T 3061-2020 — Rubber compounding ingredients - Silica, precipitated, hydrated

HG/T 2404-2020 — Rubber compounding ingredients - Silica, precipitated, hydrated - Evaluation procedures in styrene-butadiene rubber

7 Classification and status

International classification (ICS): 83.040.30

Chinese Standard Classification (CCS): G 49

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2797.5

EditionTitleRevisionStatus
HG/T 2797.5-2007Silica-alumina carbon black - Part 5: Inspection of impuritiescurrent editionCurrent
HG/T 2797.5-1996Silica-alumina carbon black - Part 5: Inspection of impuritiesprevious editionSuperseded

This page sells the current edition, HG/T 2797.5-2007. Earlier editions are listed for reference only.

How to Download HG/T 2797.5-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2797.5-2007

$85.00