HG/T 2797.1-2007Silica-alumina carbon black - Part 1: Determination of sieve residue - Water flush method (English PDF)
硅铝炭黑 第1部分:筛余物的测定 水冲洗法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2797.1-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 22, 2007
Implementation date
April 1, 2008
Scope
HG/T 2797.1-2007 is the English-translated version of 硅铝炭黑 第1部分:筛余物的测定 水冲洗法.
HG/T 2797.1-2007 opens the Chinese chemical industry series on silica-alumina carbon black with the water flush method for sieve residue. It determines the residue left on the sieve when the sample is washed through with water, and it applies to the various grades of silica-alumina carbon black.
The test sieves are those of GB/T 6003.1, HG/T 2880 is cited with it, and results are rounded according to GB/T 8170. The part was prepared as a modified adoption of ISO 1437-1992 and replaces HG/T 2797.1-1996. Issued on 22 September 2007, it has applied since 1 April 2008.
Found what you need?
Document preview — HG/T 2797.1-2007
National Standard of the People's Republic of China
- ICS
- 83.040.20
- Replacing
- HG/T 2797.1-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2797.1-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 September 2007 and has been in force since 1 April 2008.
It replaces the earlier edition HG/T 2797.1-1996.
It is one of 13 parts of the HG/T 2797 series.
2 Scope Preview
HG/T 2797.1-2007 opens the Chinese chemical industry series on silica-alumina carbon black with the water flush method for sieve residue. It determines the residue left on the sieve when the sample is washed through with water, and it applies to the various grades of silica-alumina carbon black. The test sieves are those of GB/T 6003.1, HG/T 2880 is cited with it, and results are rounded according to GB/T 8170. The part was prepared as a modified adoption of ISO 1437-1992 and replaces HG/T 2797.1-1996.
HG/T 2797.1-2007 falls under ICS 83.040.20, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6003.1
GB/T 8170
HG/T 2880
4 Where this standard sits
It cites 3 standards, listed in full above.
It is one part of the HG/T 2797 series, of which this catalogue holds 13 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2797.2-1996 — Determination of iodine value of aluminosilicate carbon absorption
HG/T 2797.2-2007 — Part 2: Determination of iodine adsorption number
HG/T 2797.3-1996 — Determination of carbon aluminosilicate dibutyl phthalate absorption values
HG/T 2797.3-2007 — Part 3: Determination of dibutyl phthalate absorption number
HG/T 2797.4-1996 — Determination of pH of the carbon black aluminosilicate
HG/T 2797.4-2007 — Part 4: Determination of pH value
HG/T 2797.5-1996 — Determination of carbon impurities aluminosilicate
HG/T 2797.5-2007 — Part 5: Inspection of impurities
HG/T 2797.6-1996 — Determine the density of Si-Al black pour
HG/T 2797.6-2007 — Part 6: Determination of pour density
HG/T 2797.7-1996 — Determination of carbon heating loss of aluminosilicate
HG/T 2797.7-2007 — Part 7: Determination of heating loss
Other editions:
HG/T 2797.1-1996 (earlier edition)
Standards on related subjects:
HG/T 5459-2018 — Pyrolysis carbon black from waste tyres
GB/T 3780.10-2017 — Carbon black -- Part 10: Determination of ash
GB/T 3780.1-2015 — Carbon black—Part 1: Test method for iodine adsorption number
HG/T 3062-2023 — Rubber compounding ingredients - Precipitated hydrated silica - Determination of silica content
HG/T 3061-2020 — Rubber compounding ingredients - Silica, precipitated, hydrated
HG/T 2404-2020 — Rubber compounding ingredients - Silica, precipitated, hydrated - Evaluation procedures in styrene-butadiene rubber
7 Classification and status
International classification (ICS): 83.040.20
Chinese Standard Classification (CCS): G 49
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 2797.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2797.1-2007 | Silica-alumina carbon black - Part 1: Determination of sieve residue - Water flush method | current edition | Current |
| HG/T 2797.1-1996 | Silica-alumina carbon black - Part 1: Determination of sieve residue - Water flush method | previous edition | Superseded |
This page sells the current edition, HG/T 2797.1-2007. Earlier editions are listed for reference only.
How to Download HG/T 2797.1-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 2797.1-2007
$145.00