HG/T 2468-2009Stainless steel railway tank cars (English PDF)
不锈钢铁道罐车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2468-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 2468-2009 is the English-translated version of 不锈钢铁道罐车.
HG/T 2468-2009 is the recommended Chinese chemical industry standard for stainless steel railway tank cars. It sets out the design, manufacture, inspection and acceptance requirements for tank cars carrying media whose saturated vapour pressure at 50 °C is below 0.1 MPa.
It applies to standard-gauge stainless steel railway tankers with a design temperature of 50 °C or less used to move fine chemical products. The text quotes GB 146.1, GB 150, GB/T 4237, GB/T 14976, GB/T 5599 and GB/T 5601, with the GB/T 4549 series and with the HG 20592-1997 to HG 20620-1997 flange documents.
It replaces HG 2468-1993. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 2468-2009
National Standard of the People's Republic of China
- ICS
- 45.060.20
- Replacing
- HG 2468-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2468-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for stainless steel railway tank cars. It sets out the design, manufacture, inspection and acceptance requirements for tank cars carrying media whose saturated vapour pressure at 50 °C is below 0.1 MPa. It applies to standard-gauge stainless steel railway tankers with a design temperature of 50 °C or less used to move fine chemical products. The text quotes GB 146.1, GB 150, GB/T 4237, GB/T 14976, GB/T 5599 and GB/T 5601, with the GB/T 4549 series and with the HG 20592-1997 to HG 20620-1997 flange documents. It replaces HG 2468-1993.
HG/T 2468-2009 falls under ICS 45.060.20, in the field of railway engineering.
This catalogue holds 6,854 other HG/T standards.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 146.1
GB 150
GB/T 196-2003 — General purpose metric screw threads - Basic dimensions
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 700
GB/T 1348
GB/T 1591
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 4237
GB/T 9439
GB/T 11352
GB/T 14976
GB/T 4549.1
GB/T 4549.2
GB/T 4549.3
GB/T 4549.4
GB/T 4549.5
GB/T 4549.6
GB/T 4549.7
GB/T 4549.8
GB/T 4549.9
GB/T 4549.10
GB/T 4549.11
GB/T 4549.12
GB/T 5601
GB/T 5599
HG 20592-1997 — Types and Parameters of Steel Pipe Flanges(European System)
HG 20593-1997 — Slip-on-welding plate steel pipe flanges (European System)
HG 20594-1997 — With neck flat welded steel pipe flanges (European system)
HG 20595 - 1997 — Steel pipe welding neck flange
HG 20596-1997 — Integrated Steel Tube Flanges (European System)
HG 20597-1997 — Socket-welded steel pipe flanges (European system)
HG 20598-1997 — Threaded Steelpipe Flanges (European System)
HG 20599-1997 — Butt-weld Loose Sleeve Steel Tube Flanges (European System)
HG 20600-1997 — Butt-weld Loose-sleeve Steel Tube Flanges (European System)
HG 20601-1997 — Steel pipe blank flanges (Europe System)
HG 20602-1997 — Blind Flange with Stainless Steel Lining (European System)
HG 20603-1997 — Technical Specifications for Steel Tube Flanges (European System)
HG 20604-1997 — Steel Tube Flanges Pressure - Temperature Ratings (European System)
HG 20605 - 1997 — Welded Joints and Dimensional Chains of Steel Tube Flanges (European System)
HG 20606-1997 — Nonmetallic Flat Gaskets for Steel Tube Flanges (European System)
HG 20607-1997 — Polytetrafluoroethylene Envelope Gaskets for Steel Pipe Flanges (European System)
HG 20608-1997 — Steel pipe flanges with flexible graphite gaskets (European system)
HG 20609-1997 — Metal Jacketed Gaskets for Steel Pipe Flanges (European System)
HG 20610-1997 — Spiral Wound Gaskets for Steel Tube Flanges (European System)
HG 20611-1997 — Tooth Profile Combined Gaskets forSteel Pipe Flanges
HG 20612-1997 — Metallic Gaskets for Steel Tube Flanges (European System)
HG 20613-1997 — Fasteners for use with steel pipe flanges (PN series)
HG 20614-1997 — Regulations on matching of steel pipe flanges, gaskets and fasteners (European system)
HG 20615 - 1997 — Types and Parameters of Steel Tube Flanges (American System)
HG 20616-1997 — Hubbed Slip-on Welding Steel Tube Flanges (American System)
HG 20617-1997 — Welded steel pipe flanges with neck (American System)
HG 20618-1997 — Welded steel pipe flanges with neck (American System)
HG 20619-1997 — Steel pipe flanges, socket welding (American series)
HG 20620-1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 6383-2025 — Polypropylene devolatilization tower
HG/T 2471-2011 — Metal anode coatings for electrolyzers
HG/T 2469-2011 — Vertical sand mills
6 Classification and status
International classification (ICS): 45.060.20
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 146.1Gauge for standard gauge railways - Part 1: Rolling stock gauge
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 196-2003General purpose metric screw threads - Basic dimensions
- GB/T 197-2003General purpose metric screw threads -- Tolerances
- GB/T 700Carbon structural steels
- GB/T 1348Spheroidal graphite iron castings
Similar standards
Editions of HG/T 2468
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2468-2009 | Stainless steel railway tank cars | current edition | Current |
| HG 2468-1993 | Stainless steel railway tank cars | previous edition | Superseded |
This page sells the current edition, HG/T 2468-2009. Earlier editions are listed for reference only.
How to Download HG/T 2468-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 146.1-1983 — Rolling stock gauge for standard gauge railways
GB 146.1-2020 — Gauge for standard gauge railways - Part 1: Rolling stock gauge
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
HG/T 2468-2009
$235.00