Valid

GB/T 9335-2009Nitrobenzene (English PDF)

硝基苯

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 9335-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 24, 2009

Implementation date

December 1, 2009

Scope

GB/T 9335-2009 is the English-translated version of 硝基苯.

GB/T 9335-2009 is the Chinese product standard for nitrobenzene, molecular formula C6H5NO2, molecular weight 123.11, CAS number 98-95-3.

It sets the requirements, the safety information, the sampling, the test methods, the inspection rules and the marking, labelling, packaging, transport and storage provisions, and is used for quality control of the product.

The quality requirements are tabulated in Table 1, and the chromatographic method of 6.4 now uses a capillary column with a polydimethylsiloxane stationary phase and the corrected area normalisation method, where the 2001 edition used a packed column and plain area normalisation; the safety information chapter is new.

Among the standards it quotes are GB/T 2385 for crystallising point, GB/T 2386-2006 for moisture, GB 12268-2005, GB 15258 and GB 16483. It replaces GB/T 9335-2001, was issued on 24 April 2009 and has applied since 1 December 2009.

Found what you need?

Document preview — GB/T 9335-2009

National Standard of the People's Republic of China

ICS
71.100.01; 87.060.10
Classification
G 56
Replacing
GB/T 9335-2001

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Requirements

Foreword

This standard replaces GB/T 9335-2001 "nitrobenzene." This standard compared with GB/T 9335-2001 The main changes are as follows.

--- Packed column to the column by the capillary column stationary phase of methyl silicone oil (I) to polydimethylsiloxane (6.4.1 of this standard; The 2001 edition of 5.3.2 and 5.3.3);

--- Quantitative methods to area normalization method by the correction area normalization method (This standard is 6.4; 2001 version 5.3.1 and 5.3.7);

--- Increase the "Safety Information" (Chapter 4 of this standard). The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the requirements of nitrobenzene, safety information, sampling, test methods, inspection rules and signs, labels, packaging, transportation, Storage.

This standard applies to product quality control nitrobenzene.

Structural formula Handkerchief handkerchief handkerchief Division division division --- division division division Molecular formula. C6H5NO2 Molecular weight. 123.11 (according to 2007 international relative atomic mass) CASRN... 98-95-3

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 190 packaging and marking of dangerous goods

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780:1997, MOD)

GB/T 2385 dye intermediate determination of crystallizing point - General method Determination of GB/T 2386-2006 dyes and dye intermediates moisture

GB/T 6678-2003 General Principles for Sampling Chemical Products

GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)

GB/T 8170-2008 revised value represents about rules and limit values and judgment

GB/T 9722 General chemical reagent gas chromatography

GB 12268-2005 of dangerous goods

GB 12463 transport of dangerous goods packaging technology

GB 15258 rules for preparation of chemical safety labels

GB 15603 commonly used hazardous chemicals stored General

GB 16483 MSDS preparation of regulations

3 Requirements

Nitrobenzene quality requirements should be consistent with the requirements of Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 9335

EditionTitleRevisionStatus
GB/T 9335-2009Nitrobenzenecurrent editionCurrent
GB/T 9335-2001Nitrobenzeneprevious editionSuperseded

This page sells the current edition, GB/T 9335-2009. Earlier editions are listed for reference only.

How to Download GB/T 9335-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 9335-2009

$165.00