GB/T 8815-2008Plasticized polyvinyl chloride (PVC) compounds for wire and cable (English PDF)
电线电缆用软聚氯乙烯塑料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8815-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 8815-2008 is the English-translated version of 电线电缆用软聚氯乙烯塑料.
GB/T 8815-2008 is the Chinese national standard covering plasticized polyvinyl chloride (PVC) compounds for wire and cable. It was issued on 30 December 2008 and has been in force since 1 September 2009, replacing GB/T 8815-2002.
The document is under the responsibility of the China National Light Industry Council. This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 8815-2008
National Standard of the People's Republic of China
- ICS
- 29.060.20
- Classification
- K 15
- Replacing
- GB/T 8815-2002
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification and designation
- 3.1 Classification
- 3.2 Designation
- 4 Appearance and color
- 5 Requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transport and storage
1 Foreword
GB/T 8815-2008 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 30 December 2008 and has been in force since 1 September 2009.
It replaces the earlier edition GB/T 8815-2002.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the classification and designation, appearance and color, requirements, test methods, inspection rules, as well as marking, packaging, transport and storage of plasticized polyvinyl chloride (PVC) compounds for wire and cable (hereinafter referred to as PVC cable materials). This standard is applicable to plasticized polyvinyl chloride (PVC) compounds for wire and cable made from PVC resin with additives such as plasticizer and stabilizer through mixing, plasticizing and granulating.
GB/T 8815-2008 falls under ICS 29.060.20, in the field of electrical engineering.
This catalogue holds 2,641 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 Normative references
GB/T 1033-1986 — Test method for density and relative density of plastics
GB/T 1040.3-2006 — Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3: 1995, IDT)
GB/T 1408.1-2006 — Insulating materials - Test methods for electric strength - Part 1: Tests at power frequencies (IEC 60243-1: 1998, IDT)
GB/T 1409-2006 — Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths (IEC 60250: 1969, MOD)
GB/T 1410-2006 — Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093: 1980, IDT)
GB/T 2406-1993 — Plastics - Determination of Flammability by Oxygen Index
GB/T 2951.7-1997 — Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 2: Loss mass test - Thermal stability test
GB/T 5470-1985 — Test method for brittleness temperature of plastics by impact
4 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
5 Related standards
Other editions:
GB/T 8815-2026 (later edition)
GB/T 8815-2002 (earlier edition)
Standards on related subjects:
GB/T 5591.1-2017 — Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements
GB/T 5591.2-2017 — Combined flexible materials for electrical insulation -- Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
GB/T 1303.13-2026 — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 13: Rigid laminated sheets based on benzoxazine resin
GB/T 5019.4-2025 — Insulating materials based on mica - Part 4: Mica paper
6 Classification and status
International classification (ICS): 29.060.20
Chinese Standard Classification (CCS): K 15
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 17737.4-2025Coaxial communication cables - Part 4: Sectional specification for leaky cables
- GB/T 26002-2025Stainless steel pliable corrugated tubing and fittings used in gas piping systems
- GB 41317-2024Stainless steel corrugated tubes for the connection of gas appliances
- GB 44017-2024Armouring hose for the connection of gas appliance
- GB/T 17737.8-2022Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
- QC/T 604-2022Clips - Type B
Similar standards
Editions of GB/T 8815
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8815-2008 | Plasticized polyvinyl chloride (PVC) compounds for wire and cable | current edition | Current |
| GB/T 8815-2002 | Plasticized polyvinyl chloride (PVC) compounds for wire and cable | previous edition | Superseded |
This page sells the current edition, GB/T 8815-2008. Earlier editions are listed for reference only.
How to Download GB/T 8815-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 8815-2008
$135.00