GB/T 14864-2013Solid-polyethene insulated flexible radio-frequency cables (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 14864-1993 "Solid PE insulated radio frequency cable."

This standard compared with GB/T 14864-1993, the main technical changes are as follows.

--- Standard name changed to "soft solid polyethylene insulated RF cable";

--- Increasing the type designation and code meaning description (see 3.1);

--- According to the practical application of the product, increasing the polyethylene sheath and LSZH polyolefin sheathed product specifications (see Table 3 ~ table 5);

--- Increased combustion performance requirements and test methods for flame retardant cable (see 4.4);

--- Eccentricity increased media requirements (see Section 4.1.3);

--- The engineering data dimensional stability as the content requirements (see 4.3.6);

--- The project uses data adjusted by the content of the standard text to Appendix A;

--- "Length measurement error should not exceed ± 10%" to "length measurement error of ± 0.5%" (see 46, 1993. Version 4.4.);

--- Increase in Appendix B "halogen flame retardant polyolefin sheath material key performance indicators";

--- Increase in Appendix C "voltage test destroy Halo."

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

1 Scope

This standard specifies the soft solid polyethylene insulated RF cable product classifications, requirements, test methods, quality assessment and signs, packaging, Transport and storage.

This standard applies to radio communications and electronic devices employing similar techniques used in soft solid polyethylene insulated RF cable.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2951.11-2008 cable and the cable Common test methods for insulating sheathing materials - Part 11: Common test methods --- Measurement of thickness and overall dimensions --- mechanical tests (IEC 60811-1:2001, IDT)

GB/T 3953-2009 electrician round copper wire

GB/T 4909.2-2009 Test methods for bare wires - Part 2: Measure

GB/T 4910-2009 tinned round copper wire

GB/T 8170 repair value expressed about the rules and limit values and judgment

GB/T 8815-2008 with a soft PVC wire and cable

GB/T 15065-2009 black polyethylene plastic wire and cable

Gases evolved during combustion of GB/T 17650.2-1998 materials from cables - Test methods - Part 2: Measurement pH and conductivity to determine the gas acidity (idt IEC 60754-2:1991, AmendmentNo.1.1997)

GB/T 17651.2-1998 of cables burning under defined conditions Measurement of smoke density - Part 2: Test procedure and requirements (Idt IEC 61034-2:1997)

GB/T 17737.1-2000 frequency cables - Part 1: Generic specification - General, definitions, requirements and test methods (idt IEC 61196-1:1995)

GB/T 17737.1-2013 Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements (IEC 61196-1:2005, IDT)

GB/T 18380.12-2008 burning test and optical fiber cables under fire conditions - Part 12. single insulated wire and cable fire Test 1kW pre-mixed flame spread vertical flame test methods (IEC 60332-1-2:2004, IDT)

JB/T 3135-2011 silver-plated soft round copper wire

YD/T 760-1995 Local telecommunication cables with polyolefin insulation materials

IEC 61196-1-102:2005 Coaxial communication cables - Part 1-102. Electrical test methods - Insulation resistance test cable media (Coaxialcommunicationcables-Part 1-102. Electricaltestmethods-Testforinsulationresistanceof cabledielectric)

IEC 61196-1-103:2005 Coaxial communication cables - Part 1-103. Electrical test methods for electric cables - Capacitance test (Coaxial communicationcables-Part 1-103. Electricaltestmethods-Testforcapacitanceofcable)

IEC 61196-1-105:2005 Coaxial communication cables - Part 1-105. Electrical test methods for cable dielectric withstanding voltage test (Coaxialcommunicationcables-Part 1-105. Electricaltestmethods-Testforwithstandvoltageof cabledielectric)