GB/T 7269-2008Arrangement,types and basic dimensions of consoles for electronic equipments (English PDF)

3.1

console or installed inside the box insert panel size should be consistent with GB/T 19520.1-2007 and GB/T 3047.1-1995.

3.2

Design group fight type console for operation of the most important, the most commonly used operations and information display control means should be arranged in the same s position.

3.3

When necessary, the console should have drawers and activities of the board, used for storing files, and Notepad.

3.4

The operator console should have the necessary leg and foot space.

4.1

no direct relationship with the operator mark, code, such as factory names, trademarks, etc., should not appear in the console surface.

4.2

console surface should not be set and display a variety of means may hinder, instruments, tools and articles operators work.

Operating mechanism 4.3 console surface arrangement and information display devices shall not interfere with each other.

4.4

console surface controls and information display device, according to function and are arranged in order.

4.5

console controls and information display device surface shall be arranged in the following range.

--- Important and most frequently used controls and information display means to be arranged in optimum operating area and the optimal measurement area;

--- Emergency device is arranged in manpower encompasses most vulnerable place, but not optimal operating areas;

--- Minor and operating mechanism and periodic use of the information display means, should not be arranged in the optimal range, this time should be divided as needed

Group, and to consider their mutual contact.

4.6

operating mechanism is arranged, all the operating mechanism should be disposed within manpower encompasses the area frequently used for sitting operating mechanism,

Its height is within 1000mm.

4.7

in the same system, the same functions of the console surface operating mechanism shall be arranged in the same way.

4.8

console surface should have a light reflective or diffusion directional dispersion, to avoid reflection in the visual highlights of the region caused by operator error

Judgment and misuse.

4.9

console surface position of the inclination angle of its value.