GB/T 5080.6-2026Equipment reliability testing—Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity (English PDF)
设备可靠性试验 第6部分:恒定失效率和恒定失效强度的有效性检验与估计
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 5080.6-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
February 1, 2027
Scope
GB/T 5080.6-2026 is the English-translated version of 设备可靠性试验 第6部分:恒定失效率和恒定失效强度的有效性检验与估计.
GB/T 5080.6-2026 is the Chinese national standard "Equipment reliability testing—Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity".
It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on February 1, 2027. It is a current standard and replaces GB/T 5080.6-1996.
Found what you need?
Document preview — GB/T 5080.6-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 5080.6-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 February 2027.
It replaces the earlier edition GB/T 5080.6-1996.
It is one of 10 parts of the GB/T 5080 series.
2 Scope Preview
GB/T 5080.6-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 5080.1-1986 — Equipment reliability testing--General requirements
GB/T 5080.1-2012 — Reliability testing -- Part 1: Test conditions and statistical test principles
GB/T 5080.2-1986 — Equipment reliability testing--Guidance for the design of test cycles
GB/T 5080.2-2012 — Reliability testing -- Part 2: Design of test cycles
GB/T 5080.4-1985 — Equipment reliability testing. Procedure for point estimates and confidence intervals from reliability determination tests (Exponential distribution)
GB/T 5080.4-2026 — 4:Statistical procedures for exponential distribution—Point estimates, confidence intervals, prediction intervals and tolerance intervals
GB/T 5080.5-1985 — Equipment reliability testing. Compliance test plans for success ratio
GB/T 5080.5-2026 — Reliability testing—Part 5: Compliance test plans for success ratio
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
Other editions:
GB/T 5080.6-1996 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 22200.5-2025Reliability of low-voltage apparatus - Part 5: Reliability test method of residual current operated circuit-breaker for household and similar uses
- GB/T 35023-2018Methods to assess the reliability of hydraulic components
- GB/T 36362-2018Point estimation and interval estimation for reliability testing of LED applied products (exponential distribution)
- GB/T 14277-2013General specification for audio combination equipment
- JB/T 11682-2013Reliability test method for ATSE
- GB/T 5080.1-2012Reliability testing -- Part 1: Test conditions and statistical test principles
Editions of GB/T 5080.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5080.6-2026 | Equipment reliability testing—Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity | — | Valid from 2027-02-01 |
| GB/T 5080.6-1996 | Equipment reliability testing. Tests for the validity of a constant failure rate assumption | — | Valid until 2027-02-01 |
| GB 5080.6-1985 | Equipment reliability testing--Tests for the validity of a constant failure rate assumption | — | Obsolete |
This page sells the current edition, GB/T 5080.6-2026. Earlier editions are listed for reference only.
How to Download GB/T 5080.6-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB/T 5080.5-1985 — Equipment reliability testing. Compliance test plans for success ratio
GB/T 5080.5-2026 — Reliability testing—Part 5: Compliance test plans for success ratio
GB/T 5080.6-2026
$255.00