GB/T 14277-2013General specification for audio combination equipment (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 14277-1993 "a combination of audio equipment general technical conditions" and GB/T 12062-1989 "high fidelity audio Combined device minimum performance requirements. "

This standard and GB/T 14277-1993 compared to the main changes are as follows.

Text structure --- deprecated GB/T 14277-1993 adopted, as required using a common standardized format;

--- Of GB/T 14277-1993 Chapter 6, "amp" content supplement form 4.3.1 "Amplifier";

--- Remove GB/T 14277-1993 Chapter 7, "turntables and amplifiers combination", Chapter 11, "TV tuner and audio amplifier Combination ", Chapter 19," TV tuner and audio amplifier combination "

--- The content GB/T 14277-1993 Chapter 10 "laser discs and amplifier combination" supplement form 4.3.4 "Laser sing Amplifier combination plate ";

--- The content GB/T 14277-1993 Chapter 12 "speaker (system) in combination with the amplifier" of changes and additions to form "Combination speaker (system) and amplifiers" 4.3.5;

--- Of GB/T 14277-1993 Table 6 "speaker (system) in combination with the amplifier parameters and requirements" Added content form Table 6 "speaker (system) in combination with the amplifier parameters and requirements";

--- The content GB/T 14277-1993 Chapter 16, "broadcast tuner and amplifier combination" (according to GB/T 6163) were revised Change the FM mono indicators deviation to ± 75kHz, including SNR, sensitivity, capture ratio IF rejection, transfer Amplitude suppression ratio, two-way selection, image rejection, spurious response suppression, effective frequency range, total harmonic distortion, the formation 5.1.2 "broadcast tuner Amplifier combination ";

--- Of GB/T 14277-1993 in 16.2.20 and 16.2.21 content (according to GB/T 2846) be modified to 14dB Valley Point method to the maximum output tuning method, the formation of 5.1.2.21 and 5.1.2.22;

--- The content GB/T 14277-1993 Chapter 18 "laser discs and amplifier combination" supplement form 5.1.4 "Laser sing Amplifier combination plate ";

--- The content GB/T 14277-1993 Chapter 20 "speaker (system) and amplifier combination" modified form 5.1.5 "Young Microphone (system) in combination with the amplifier ";

--- Of GB/T 14277-1993 Chapter 22, "Safety requirements and test methods" and modify the contents of the supplement form 4.4.2 "An "5.2.2 and" test "the full requirements of safety requirements;

--- Of GB/T 14277-1993 Chapter 23, "EMC requirements and test methods" and modify the contents of the supplement, the new "Harmony Wave current emission limits "section content, and re-edit the audio and video equipment Immunity characteristics - Requirements and test methods form 4.4.3 "electromagnetic compatibility" and 5.2.3 "EMC test methods";

--- 14277-1993 Table 17 for "out of the box and check the contents of the defect criterion" content GB/T make additions to form a table 16 "check box Check the contents and failed criterion ";

--- 14277-1993 Table 19 on "delivery inspection at room temperature performance measurements" content GB/T make additions to form a table 19 "Settlement Performance test at room temperature measurements. "

1 Scope

This standard specifies the technical requirements for home audio combination equipment, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to the combination of home audio equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 2828.1-2012 Sampling procedures for inspection - Part 1: by acceptance quality limit (AQL) retrieval batch test sample plan

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)

GB/T 2846 AM broadcast radio measurement method

GB/T 4312.1 FM Radio Transmitter Technical parameters and measuring methods for mono and stereo

GB 4943.1-2011 Safety of information technology equipment - Part 1: General requirements

GB/T 5080.6 Equipment reliability testing constant failure rate assumption validation

GB/T 5080.7 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of test plans

GB/T 5465.2 Graphical symbols for electrical equipment - Part 2: Graphical symbols

GB/T 6163 Methods of measurement FM radio receiver

GB/T 7309 General specification audiocassette

GB 8898-2011 Audio, video and similar electronic apparatus - Safety requirements

GB 9254 information technology equipment Radio disturbance characteristics - Limits and methods of measurement

GB/T 9374-2012 Basic parameters for sound broadcasting receivers

GB/T 9375-1988 radios, tape recorders listening test

GB/T 9383 Sound and television broadcast receivers and associated equipment - Immunity characteristics Limits and methods of measurement

GB/T 9384 radio broadcast, radio and television receivers, tape recorders and audio amplifiers (amplifiers) to the test environment Sum Test Method

GB/T 12060.3-2011 Sound system equipment - Part 3: Methods of measurement of audio amplifier

GB/T 12060.5-2011 Sound system equipment - Part 5: Methods for measuring performance main speaker

GB 13837 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

GB/T 14197-2012 audio, video and audiovisual systems interconnection Preferred matching values

GB/T 15860-2011 General specification for CD player

GB/T 17618 Information technology equipment - Immunity characteristics - Limits and methods of measurement

GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current <=16A)

GSBM61001 electro-acoustic products subjective sound quality evaluation program source