Valid

GB/T 43673-2024Non-metallic composite coiled tubing with embedded cable (English PDF)

非金属敷缆复合连续油管

Preview PDF

This is a limited preview

Buy now to download the full PDF (31 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43673-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2024

Implementation date

July 1, 2024

Scope

GB/T 43673-2024 is the English-translated version of 非金属敷缆复合连续油管.

GB/T 43673-2024 is the Chinese standard "Non-metallic composite coiled tubing with embedded cable". Its scope clause reads: This document specifies the product description, materials, technical requirements, test methods, and Methods, inspection rules, marking, packaging, transportation, storage and installation.

This document is applicable to cable pipes used for artificial lifting or water injection in vertical wells, directional wells, horizontal wells and other underground wells.

Found what you need?

Document preview — GB/T 43673-2024

National Standard of the People's Republic of China

ICS: 75.180.10
Classification: E 92

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Product Description
4.1 Tube structure
4.2 Connector device
4.3 Product Code
5 Materials
5.1 Lining layer
5.2 Reinforcement layer and tensile layer
5.3 Outer sheath
5.4 Connectors
5.5 Power cables, signal cables and auxiliary heating cables
5.6 Optical Fiber
6 Technical Requirements
6.1 General
6.2 NPR
6.3 TLR
6.4 WTR
6.5 MOP
6.6 Length
6.7 Appearance Quality
6.8 Dimensions, NPR, TLR and MBR
6.9 Physical and chemical properties
6.10 Electrical properties
6.11 Heating performance
6.12 Full roll pressure test
7 Test methods
7.1 Sample state adjustment
7.2 Appearance Quality
7.3 Specifications and dimensions
7.4 Compression cracking stability
7.5 Short-term hydrostatic strength
7.6 Short-term burst pressure
7.7 Tensile properties
7.8 Collapse strength
7.9 Axial elongation at NPR
7.10 MBR
7.11 1000h survival test
7.12 Rapid pressure relief
7.13 Short-term cycle pressure
7.14 Conductor resistance
7.15 Insulation resistance
7.16 Withstand voltage
7.17 Heating
7.18 Full roll pressure test
8 Inspection Rules
8.1 Inspection categories
8.2 Factory Inspection
8.3 Type test
9 Marking, packaging, transportation and storage
9.1 Sign
9.2 Packaging
9.3 Transportation
9.4 Storage
10 Installation
Appendix A (Informative) Chemical resistance
Appendix B (Informative) Test method for gas permeability of polymer materials
Appendix C (Normative) Collapse Strength Test Method
Appendix D (Informative) Test method for axial elongation under pressure
Appendix E (Informative) Cable Pipe Installation Notes

1 Scope

This document specifies the product description, materials, technical requirements, test methods, and

Methods, inspection rules, marking, packaging, transportation, storage and installation.

This document is applicable to cable pipes used for artificial lifting or water injection in vertical wells, directional wells, horizontal wells and other underground wells.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL)

GB/T 2918 Standard environment for conditioning and testing of plastic specimens

GB/T 3048.4 Test methods for electrical properties of wires and cables Part 4.Conductor DC resistance test

GB/T 3048.5 Test methods for electrical properties of wires and cables Part 5.Insulation resistance test

GB/T 3048.8 Test methods for electrical properties of wires and cables Part 8.AC voltage test

GB/T 3956 Cable conductors

GB/T 6111 Determination of the resistance to internal pressure of thermoplastic piping systems for fluid transportation

GB/T 8162 Seamless steel tube for structural use

GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics

GB/T 8806 Determination of dimensions of plastic parts for plastic piping systems

GB/T 9771.1 Single-mode optical fibre for communication Part 1.Characteristics of dispersion-free single-mode optical fibre

GB/T 12357.1 Multimode optical fibre for telecommunications Part 1.Characteristics of category A1 multimode optical fibre

GB/T 13657 Bisphenol A epoxy resin

GB/T 14976 Seamless stainless steel pipe for fluid transportation

GB/T 15560 Hydraulic instantaneous burst and pressure resistance test methods for plastic pipes for fluid transportation

GB/T 18252 Plastic piping systems - Determination of the long-term hydrostatic strength of thermoplastic materials in the form of pipes by extrapolation

GB/T 18369 Glass fiber roving

GB/T 18475 Material classification and designation for thermoplastic pressure pipes and fittings - Overall use (design) factors

GB/T 18992.2 Cross-linked polyethylene (PE-X) piping systems for hot and cold water Part 2.Pipes

GB/T 26752 Polyacrylonitrile-based carbon fiber

GB/T 34903.1 Petroleum, petrochemical and natural gas industries Non-metallic materials in contact with media related to oil and gas production Part 1.

Thermoplastics

FZ/T 54076 Para-aramid (1414) filament

JB/T 5331 Special polyimide film wrapped round copper wire for submersible motors

JB/T 13484 Rated voltage 0.6/1kV fluoroplastic insulated power cable

SY/T 6662.2 Non-metallic composite pipes for petroleum and natural gas industries Part 2.Flexible composite high-pressure transmission pipes

SY/T 6794-2018 Coilable reinforced plastic line pipe

GB/T 23258 | SY/T 5164 | GB 50341 | GB/T 29169 | GB/T 17389 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.

Referenced standards

Normative references

Editions of GB/T 43673

Edition	Title	Revision	Status
GB/T 43673-2024	Non-metallic composite coiled tubing with embedded cable	current edition	Current

This page sells the current edition, GB/T 43673-2024. Earlier editions are listed for reference only.

How to Download GB/T 43673-2024

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.