Valid

GB/T 43002-2023Children's furniture—Quality inspection and quality judgement (English PDF)

儿童家具质量检验及质量判定

Preview PDF

This is a limited preview

Buy now to download the full PDF (39 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43002-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2023

Implementation date

April 1, 2024

Scope

GB/T 43002-2023 is the English-translated version of 儿童家具质量检验及质量判定.

GB/T 43002-2023 is the Chinese standard "Children's furniture—Quality inspection and quality judgement". Its scope clause reads: This document specifies the quality requirements, test methods, quality inspection and judgment of children's furniture.

This document is applicable to quality inspection and judgment of children's furniture. Its clauses include terms and definitions; quality requirements.

Found what you need?

Document preview — GB/T 43002-2023

National Standard of the People's Republic of China

ICS: 97.140
Classification: Y 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative reference documents
3 Terms and Definitions
4 Quality requirements
5 Test methods
6 Quality Inspection
7 Quality Judgment
Appendix A (informative) Relevant body size data of minors in my country
Appendix B (Normative) Mechanical properties test of children’s furniture

1 Scope

This document specifies the quality requirements, test methods, quality inspection and judgment of children's furniture.

This document is applicable to quality inspection and judgment of children's furniture.

2 Normative references

The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the Edition cited applies. For undated references, the latest Edition of the referenced document (including any amendments) applies.

GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

GB/T 2828.3 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures

GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)

GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method)

GB/T 3920 Textiles - Tests for colour fastness - Color fastness to rubbing

GB/T 4893.1 Test of surface coatings of furniture - Part 1: Determination of surface resistance to cold liquids

GB/T 4893.2 Test of surface coatings of furniture - Part 2: Determination of surface resistance to wet heat

GB/T 4893.3 Test of surface coatings of furniture - Part 3: Determination of surface resistance to dry heat

GB/T 4893.4 Test of surface coatings of furniture - Part 4: Determination of adhesion - Cross cut

GB/T 4893.7 Test of surface coatings of furniture - Part 7: Determination of surface resistance to alternation of heat and cold

GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of wearability

GB/T 4893.9 Test of surface coatings of furniture - Part 8: Determination of resistance to impact

GB/T 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture

GB/T 6669-2008 Flexible cellular polymeric materials - Determination of compression set

GB 6675.2-2014 Toys safety - Part 2: Mechanical and physical properties

GB 6675.4-2014 Safety of toys - Part 4: Migration of certain elements

GB/T 6739 Paints and varnishes - Determination of film hardness by pencil test

GB/T 7573 Textiles - Determination of pH of aqueous extract

GB/T 10111 Generation of random numbers and procedures applied to sampling inspection for product quality

GB/T 10357.1-2013 Test of mechanical properties of furniture - Part 1: Strength and durabilty of tables

GB/T 10357.2-2013 Test of mechanical properties of furniture - Part 2: Stability of chairs and stools

GB/T 10357.3-2013 Test of mechanical properties of furniture - Part 3: Strength and durability of chairs and stools

GB/T 10357.5-2013 Test of mechanical properties of furniture - Part 5: Strength and durability of storage units

GB/T 10357.6-2013 Test of mechanical properties of furniture - Part 6: Strength and durability of beds

GB/T 10357.7-2013 Test of mechanical properties of furniture - Part 7: Stability of tables

GB/T 10357.8-2015 Test of mechanical properties of furniture - Part 8: Stability of chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs

GB/T 13264 Sampling procedures and tables for small lot inspection by attributes for percent nonconforming items

GB/T 17592 Textiles - Determination of the banned azo colourants

GB/T 17657-2022 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels

GB 17927.1 Upholstered furniture - Assessment of the resistance to ignition of mattress and sofa - Part 1: Smouldering cigarette

GB 17927.2 Upholstered furniture - Assessment of the resistance to ignition of mattress and sofa - Part 2: Match flame equivalent

GB 19865-2005 Electric toys - Safety

GB/T 19941 Leather and fur - Determination of formaldehyde content -

GB/T 19942 Leather and fur - Chemical tests - Determination of banned azo colourants

GB/T 22048 Determination of certain phthalate esters in toys and children’s products

GB/T 23344 Textiles - Determination of 4-aminoazobenzene

GB/T 24430-2023 Test method for bunk bed structure safety

GB/T 35607 Green product assessment - Furniture

QB/T 1950 Determination of resistance to water of furniture surface coatings

QB/T 1952.1 Upholstered furniture - Sofa

QB/T 1952.2 Upholstered furniture - Spring mattress

QB/T 2280-2016 Office furniture - Office chair

QB/T 2537 Leather - Tests for colour fastness - Colour fastness to to-and-fro rubbing

QB/T 2724 Leather - Chemical tests - Determination of pH

QB/T3826 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS)

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 children's furniture

furniture designed or intended for used by children under the age of 3 to 14

[Source: GB 28007-2011, 3.1]

3.2 driving mechanism

mechanism of connections used for parts of furniture, in which the movement of at least one connected part is not driven by manpower

Example: Electric or mechanical drive mechanism.

3.3 folding mechanism

mechanism of connection by hinges or rotary shafts, which may produce extrusion and shearing during operation

[Source: GB 28007-2011, 3.3]

3.4 hazardous projection

accessible protruding parts that may cause injury and/or danger during use

[Source: GB 28007-2011, 3.4]

3.5 hazardous sharp edge

accessible edges that may cause injury and/or danger during use

[Source: GB 28007-2011, 3.5]

3.6 hazardous sharp point

accessible sharp points that may cause injury and/or danger during use

[Source: GB 28007-2011, 3.6]

3.7 protective cap or cover

component that covers potentially hazardous edges or projections to reduce injuries

[Source: GB 28007-2011, 3.7]

3.8 tall desk / table product

table product with a height of more than 1,000 mm and having a bookshelf or similar structure above

[Source: GB 28007-2011, 3.2]

3.9 inspection

activity of measuring, inspecting, testing or measuring one or more characteristics of a product or service and comparing them with specified requirements in order to determine whether the characteristics of the product or service are acceptable

[Source: GB/T 2828.1-2012, 3.1.1]

3.10 type test

comprehensive tests and inspections according to quality indexes specified in the product standard

[Source: GB/T 36503-2018, 3.1, revised]

3.11 process quality control

test and inspection on parts or products during processing, which aim to prevent batch of unacceptable products and prevent unqualified products from flowing into the next process

[Source: GB/T 36503-2018, 3.2]

3.12 periodic inspection

test and inspection on the samples selected from more or several batches that pass the batch-by-batch inspection to judge whether the stability of the production process meets the specified requirements within the specified cycle (time)

[Source: GB/T 36503-2018, 3.3]

3.13 first article inspection

test and inspection on the first one or ones of the parts manufactured at the beginning of production (new shift) or after adjustment to one or more procedure factors (process, tooling, equipment, etc.)

[Source: GB/T 36503-2018, 3.4]

3.14 tour inspection

supervision and inspection carried out by inspectors at the production site in a certain time interval on the product quality and processing technology in a relevant process

[Source: GB/T 36503-2018, 3.5]

3.15 end inspection

Inspection on a batch of products completed in a certain procedure

[Source: GB/T 36503-2018, 3.6]

3.16 quality consistency inspection

final inspection, ex-factory inspection or acceptance inspection carried out by the quality inspection department of the enterprise on the products of a production line that pass batch-by-batch inspection before warehousing, which aims to check whether the continuous stability of product quality can be guaranteed in the production process and prevent unacceptable products from being delivered to users

[Source: GB/T 36503-2018, 3.7]

4 Quality requirements

4.1 Requirements on main functional dimensions

The main functional dimensions of the products shall meet the requirements specified in Table 1. When a table and a chair are a suite, the height of the table top and seat are allowed to exceed the upper limit of the required dimension range in Table 1 on the premise of that they meet the requirements in the matching height difference between the middle headroom height and the seat surfaces of the table and chair.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 32444-2026|GB/T 32445-2026|GB/T 47490-2026|GB/T 47491-2026|GB/T 10357.3-2025|GB/T 10357.7-2025

How to Download GB/T 43002-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.