Valid

GB/T 42025-2022Intelligent manufacturing—Radio frequency identification system—Test methods for UHF RFID system performance (English PDF)

智能制造射频识别系统超高频RFID系统性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42025-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2022

Implementation date

May 1, 2023

Scope

GB/T 42025-2022 is the English-translated version of 智能制造射频识别系统超高频RFID系统性能测试方法.

GB/T 42025-2022 describes a general method for testing the performance of UHF RFID systems used in intelligent manufacturing, and clause 1 applies it to exactly that.

Its contents list covers the general test requirements - test item selection, standard atmospheric conditions, preprocessing, default tolerance, measurement uncertainty, identification and read/write tests, communication parameters, tag arrangement, length and velocity sampling steps, direction of movement and the test report - and then one clause each for reader immunity, mutual interference between densely deployed readers, tag environmental adaptability, stacked tag performance, multi-tag access capability and movement speed in typical application scenarios, with a normative annex of those scenarios.

It defines tag read sensitivity as the minimum carrier power the tag needs to complete a command sequence. Issued 14 October 2022, applied from 1 May 2023.

Found what you need?

Document preview — GB/T 42025-2022

National Standard of the People's Republic of China

ICS: 35.240.50
Classification: L 85

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Symbols and Abbreviations
5 General Test Requirements
5.1 Test item selection
5.2 Standard atmospheric conditions
5.3 Preprocessing
5.4 Default tolerance
5.5 Measurement uncertainty
5.6 Identification Test
5.7 Reading and writing test
5.8 Communication parameters
5.9 Tab Arrangement
5.10 Length sampling step
5.11 Velocity Sampling Step
5.12 Movement direction
5.13 Test report
6 Reader immunity
6.1 Test purpose
6.2 Test arrangement
6.3 Test Step
6.4 Test report
7 Intensive reader-writer mutual interference
7.1 Purpose of testing
7.2 Test arrangement
7.3 Test Step
7.4 Test report
8 Label Environmental Adaptability
8.1 Purpose of testing
8.2 Test arrangement
8.3 Test Step
8.4 Test report
9 Stacking Label Performance
9.1 Purpose of testing
9.2 Test arrangement
9.3 Test Step
9.4 Test report
10 Multi-label access capability in typical application scenarios
10.1 Purpose of testing
10.2 Test arrangement
10.3 Test Step
10.4 Test report
11 Movement speed in typical application scenarios
11.1 Purpose of testing
11.2 Test arrangement
11.3 Test Step
11.4 Test report
Appendix A (normative) Typical Application Scenario
Appendix B (Informative) Test Report Record Information
Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document describes a general methodology for system performance testing of UHF RFID for smart manufacturing.

This document is suitable for testing the performance of UHF RFID systems in the field of intelligent manufacturing.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test

GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test

GB/T 17626.4-2018 Electromagnetic Compatibility Test and Measurement Technology Electrical Fast Transient Burst Immunity Test

GB/T 17626.5-2019 Electromagnetic Compatibility Test and Measurement Technology Surge (Shock) Immunity Test

GB/T 17626.6-2017 Electromagnetic Compatibility Test and Measurement Technology Conducted Disturbance Immunity Induced by Radio Frequency Fields

GB/T 17626.8-2006 Electromagnetic Compatibility Test and Measurement Technology Power Frequency Magnetic Field Immunity Test

GB/T 17626.11-2008 Electromagnetic Compatibility Test and Measurement Technology Voltage Dips, Short Interruptions and Voltage Change Immunity test

GB/T 29261.3-2012 Information Technology Automatic Identification and Data Acquisition Technical Vocabulary Part 3: Radio Frequency Identification

GB/T 29768-2013 Information Technology Radio Frequency Identification 800/900MHz Air Interface Protocol

3 Terms and Definitions

The terms and definitions defined in GB/T 29261.3-2012 and the following terms and definitions apply to this document.

3.1 The number of times the tag was successfully read/written in unit time (s)

3.2 Tag read sensitivity

The minimum carrier power required by the tag to successfully complete a sequence of commands.

3.3 Tagbackscatterpower

The power returned after successfully completing a series of commands when the tag is at a certain sensitivity level.

4 Symbols and Abbreviations

The following symbols and abbreviations apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 25109.5-2026|GB/T 47018-2026|GB/T 47019-2026|GB/T 47021-2026|GB/T 47118-2026|GB/T 47461-2026

How to Download GB/T 42025-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.