GB/T 39057-2020Guidance for economic value evaluation for science and technology achievements (English PDF)
科技成果经济价值评估指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39057-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 21, 2020
Implementation date
February 1, 2021
Scope
GB/T 39057-2020 is the English-translated version of 科技成果经济价值评估指南.
GB/T 39057-2020 is the Chinese standard "Guidance for economic value evaluation for science and technology achievements".
Its scope clause reads: This standard provides terms and definitions, evaluation methods, evaluation institutions and evaluation procedures involved in the evaluation of the economic value of scientific and technological achievements.
Guidance. This standard applies to the evaluation of the economic value of scientific and technological achievements in mature markets. Its clauses include terms and definitions; evaluation method.
Found what you need?
Document preview — GB/T 39057-2020
National Standard of the People's Republic of China
- ICS
- 03.020
- Classification
- A 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Terms and definitions1
- 3 Evaluation method1
- 3.1 Method selection1
- 3.2 Income method2
- 3.3 Market Law2
- 3.4 Cost method3
- 4 Evaluation agency3
- 5 Evaluation procedure3
- 5.1 Application3
- 5.2 Acceptance3
- 5.3 Organizational Evaluation4
- 5.4 Evaluation report4
- 5.5 Archive4
- Appendix B (informative appendix) Economic value evaluation report of scientific and technological achievements7
1 Scope
This standard provides terms and definitions, evaluation methods, evaluation institutions and evaluation procedures involved in the evaluation of the economic value of scientific and technological achievements.
Guidance.
This standard applies to the evaluation of the economic value of scientific and technological achievements in mature markets.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Scientificandtechnologicalachievements
Achievements of practical value produced through scientific research and technological development.
Note. Refer to "Law of the People's Republic of China on Promoting the Transformation of Scientific and Technological Achievements" (revised in.2015).
2.2 Economicvalue
A monetary measure of the economic benefits obtained from the transformation and application of scientific and technological achievements.
2.3 Economicvalueevaluation
According to certain goals and assumptions, and in accordance with certain procedures, the comprehensive application of relevant theories, models and methods will provide economic value for scientific and technological achievements.
The process of value analysis and estimation.
2.4 Developedmarket
Low growth rate, high market share.
3 Evaluation method
3.1 Method selection
3.1.1
When selecting an evaluation method, it is advisable to analyze the benefits according to the evaluation purpose, evaluation object, value type, data collection and other relevant conditions
Applicability of basic methods such as method, market method, and cost method are evaluated, and one or more evaluation methods should be appropriately selected.
3.1.2
For the selection of evaluation methods, it is necessary to consider the following factors.
a) The future income of the assessed scientific and technological achievements can be predicted and can be measured in currency, and the income method should be used;
b) If there are transactions in the same scientific and technological achievements of the valuation object, the market method should be used;
c) If the evaluation object can be re-developed as an independent R&D project, the cost method should be used.
3.1.3
When the evaluation object applies two or more evaluation methods for evaluation, all applicable evaluation methods should be selected for evaluation at the same time; for example,
If a method is selected, it is necessary to explain and state the reasons in the evaluation report.
3.1.4
When two or more evaluation methods are used to obtain different evaluation results, there is a big difference, the analysis of the evaluation process is
If necessary, the evaluation result of the best evaluation method should be selected.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39057-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39057-2020
$210.00