GB/T 37048-2018Technical specification for lightning protection of expressway electromechanical systems (English PDF)
高速公路机电系统防雷技术规范
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37048-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
July 1, 2019
Scope
GB/T 37048-2018 is the English-translated version of 高速公路机电系统防雷技术规范.
GB/T 37048-2018 sets out how the electromechanical systems of Chinese expressways are protected against lightning, covering monitoring, communication, toll, power distribution, lighting and tunnel equipment.
It grades the areas crossed by the road by thunderstorm days, divides the installations into lightning protection zones and lays down design and construction requirements for direct lightning protection and for protection against the lightning electromagnetic pulse, through equipotential bonding, magnetic shielding, isolation interfaces and surge protective devices (SPD).
It also covers the detection and maintenance of the lightning protection devices, with annexes on thunderstorm days in major cities, zone division, M-type bonding, SPD classes and impulse withstand voltages.
It applies to new, rebuilt and expanded expressways and may be used as a reference for other roads. It was issued on 28 December 2018 and has applied since 1 July 2019.
Found what you need?
Document preview — GB/T 37048-2018
National Standard of the People's Republic of China
- ICS
- 91.120.40
- Classification
- M 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General Provisions
- 5 direct lightning protection
- 6 lightning electromagnetic pulse protection
- 6.1 Equipotential bonding
- 6.2 Magnetic shielding
- 6.3 Isolation interface
- 6.4 Surge Protector (SPD)
- 7 Detection and maintenance of lightning protection devices
- Appendix A (informative appendix) Annual average thunderstorm days in major cities nationwide
- Appendix B (Normative Appendix) Division of Lightning Protection Zones (LPZ)
- Appendix C (informative) Schematic diagram of M-type equipotential bonding method
- Appendix D (informative) Classification of SPD
- Appendix E (informative) Impact voltage rating (Uw) for low-voltage electrical and electronic equipment
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard stipulates the division of thunderstorm day grades in the area where the electromechanical system of the expressway is located, the division of lightning protection zones, direct lightning strikes and lightning Requirements for design and construction of magnetic pulse protection, detection and maintenance of lightning protection devices.
This standard is applicable to lightning protection design, construction, inspection and maintenance of new, rebuilt and expanded highway electromechanical systems. Other grade roads Lightning protection design, construction, inspection and maintenance of electromechanical systems can be used as reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 18802.1 Low-voltage surge protectors (SPD) Part 1: Performance requirements and test for surge protectors of low-voltage distribution systems Test method
GB/T 18802.21-2016 Low voltage surge protectors - Part 21: Surge protector (SPD) performance for telecommunication and signal networks Requirements and test methods
GB/T 18802.31-2016 Low-voltage surge protectors for special applications (including DC) - Surge protectors - Part 31: Surge protector (SPD) performance requirements and test methods for volt systems
GB/T 21431 Building lightning protection device testing technical specification
GB/T 21714.3-2015 Lightning protection - Part 3: Physical damage and dangers of buildings
GB/T 21714.4-2015 Lightning protection - Part 4: Electrical and electronic systems in buildings
GB/T 33588.2-2017 Lightning protection system components (LPSC) Part 2: Requirements for conductors and earthing poles
GB 50057-2010 lightning protection design code for buildings
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Expressway electromechanical system
General name for highway monitoring system, communication system, toll system, power distribution system, lighting system (including bridge) and tunnel electromechanical system.
3.2 Tunnel electromechanical system
Monitoring facilities, communication facilities, power distribution facilities, lighting facilities, ventilation facilities and fire fighting facilities in tunnels and tunnel entrances and exits General name.
3.3 Monitoring system
An information system that provides information for traffic control systems and various monitoring devices that are deployed at appropriate locations along the route.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 18802.21-2016Low-voltage surge protective devices -- Part 21: Surge protective devices connected to telecommunications and signaling networks -- Performance requirements and testing methods
- GB/T 18802.31-2016Low-voltage surge protective devices—Part 31: Surge protective devices connected to photovoltaic installations—Requirements and test methods
- GB/T 21431Technical specification for inspection of lightning protection systems of buildings
- GB/T 21714.3-2015Protection against lightning - Part 3: Physical damage to structures and life hazard
- GB/T 21714.4-2015Protection against lightning - Part 4: Electrical and electronic systems within structures
- GB/T 33588.2-2017Lightning protection system components (LPSC) - Part 2: Requirements for air-termination systems, down-conductors and earth electrodes
GB/T 18802.1
Similar standards
How to Download GB/T 37048-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50057-2010 — Code for design protection of structures against lightning
GB/T 18802.11-2020 — Low-voltage surge protective devices (SPD) - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
GB/T 18802.12-2024 — Low-voltage surge protective device (SPD) - Part 12: Surge protective devices connected to low-voltage power systems - Selection and application principles
Secure payment via Stripe
Payments accepted
GB/T 37048-2018
$355.00