GB/T 35794-2018Safety design for oxygen system of civil aircraft (English PDF)
民用飞机氧气系统安全性设计
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35794-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 35794-2018 is the English-translated version of 民用飞机氧气系统安全性设计.
GB/T 35794-2018 sets out the Chinese national requirements for the safety design of oxygen systems in civil aircraft. It covers the design criteria, the design requirements, divided into general, detailed and installation requirements, the design methods and the design verification, through confirmation and verification.
The criteria require the system to work under all the environmental conditions the aircraft meets, set probability targets for catastrophic, hazardous and major failure conditions, and call for failure monitoring and crew warnings.
Safety requirements for the system, subsystems, equipment and components are derived from the aircraft-level and system-level functional hazard assessment, and the abbreviations it defines include FMEA, fault tree analysis, common cause analysis and preliminary system safety assessment.
Aircraft and equipment designers use it. It was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35794-2018
National Standard of the People's Republic of China
- ICS
- 49.095
- Classification
- V 44
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 4 Design Criteria
- 5 Design Requirements
- 5.1 General requirements
- 5.2 Detailed Requirements
- 5.3 Installation Requirements
- 6 Design Method
- 7 Design Verification
- 7.1 Confirmation
- 7.2 Verification
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the safety design guidelines, design requirements, design methods and design verification for civil aircraft oxygen systems.
This standard applies to the safety design of civil aircraft oxygen systems.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version is adapted to this document. In the case of undated references, the latest version (including all amendments) applies to this document.
CCAR25 China Civil Aviation Regulations Part 25 Airworthiness Standards for Transport Aircraft
SAEARP4761 Guidelines and Methods for the Safety Assessment Process of Airborne Systems and Equipment for Civil Aircraft (Guidelinesand Methodsforconductingthesafetyassessmentprocessoncivilairbornesystemsandequipment)
3 Abbreviations
The following abbreviations apply to this document.
CCA---Common Cause Analysis (CommonCauseAnalysis)
FHA - Functional Hazard Assessment
FMEA - Failure Mode and Effect Analysis (FailureModeandEffectAnalysis)
FTA---FaultTreeAnalysis
PSSA---Preliminary System Safety Assessment
SSA---SystemSafetyAssessment
4 Design Guidelines
Oxygen system safety design should generally follow the following design criteria.
a) The oxygen system should be designed and installed to perform its intended function under various environmental conditions in which the aircraft is operating.
b) Oxygen systems and related components, when considered separately or together with other systems, should be designed and installed to. Every catastrophic Failure conditions are extremely unlikely (< 10^-9) and will not be caused by a single failure; each dangerous failure condition is minimal Possible (< 10^-7); Each major failure condition is very unlikely (< 10^-5).
c) For the unsafe working conditions of the oxygen system caused by the following failure events, the system shall adopt failure monitoring and warning measures, and shall Information is provided to the crew so that the crew can take appropriate corrective action. This failure event is part of potentially disastrous consequences. This failure event combined with other potential secondary failure events or previous events can result in a catastrophic failure state. If needed If corrective actions are taken immediately, warning instructions should be provided. Systems and controls, including instructions and notices, should be designed to make Unit errors that may cause additional danger are minimized.
d) When the failure display device or monitoring instrument of the oxygen system fails, it shall not affect the safety of the aircraft and the normal operation of the system.
e) The system design stage should be based on aircraft-level FHA system-level FHA, determine the aircraft oxygen system, subsystems, equipment and components The safety requirements to be met.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35794-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35794-2018
$145.00