GB/T 36508-2018Inflatable life preservers for aviation (English PDF)
航空用气胀式救生衣
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36508-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 13, 2018
Implementation date
February 1, 2019
Scope
GB/T 36508-2018 is the English-translated version of 航空用气胀式救生衣.
GB/T 36508-2018 covers the inflatable life jackets carried on aircraft.
It divides them into four categories - adult, adult/child, child and infant - according to the weight of the wearer, and sets performance requirements that include protection against donning errors, air tightness, inflation, operating temperature range, airbag strength, buoyancy, floating posture, wearing and the survivor locator light, together with requirements on materials.
The test methods cover non-metallic materials, molded non-metallic parts and metal parts as well as each performance item, and normative annexes describe accelerated ageing in an oven, the peel strength of joints and the physical characteristics of the infant dummy.
It also gives the inspection rules for qualification and quality conformance tests and the rules on marking, labels, accompanying documents, packaging, transport and storage. It was issued on 13 July 2018 and has applied since 1 February 2019.
Found what you need?
Document preview — GB/T 36508-2018
National Standard of the People's Republic of China
- ICS
- 49.095
- Classification
- V 44
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Category
- 4 Technical requirements
- 4.1 Performance
- 4.2 Material
- 5 Test method
- 5.1 Non-metallic materials
- 5.2 Molded non-metallic parts
- 5.3 Metal parts
- 5.4 Appearance and Structure
- 5.5 Air tightness
- 5.6 Inflatable
- 5.7 Operating temperature range
- 5.8 Airbag strength
- 5.9 Buoyancy
- 5.10 Floating posture
- 5.11 wearing
- 5.12 life-saving positioning light
- 6 Inspection rules
- 6.1 Inspection classification
- 6.2 Identification test
- 6.3 Quality consistency test
- 7 logos, labels and accompanying documents
- 7.1 Mark
- 7.2 Label
- 7.3 accompanying documents
- 8 Packaging, transportation and storage
- 8.1 Packing
- 8.2 Transportation
- 8.3 Storage
- Appendix A (Normative Appendix) Accelerated Aging Test Method---Oven Method
- Appendix B (Normative) Test Method for Joint Peel Strength
- Appendix C (Normative Appendix) Physical Characteristics of Early Childhood Dummy
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the classification, technical requirements, test methods and inspection rules for aviation inflatable life jackets (hereinafter referred to as "life jackets").
And signs, labels and accompanying documents, packaging, shipping and storage requirements.
This standard applies to aviation inflatable life jackets.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1038 plastic film and sheet gas permeability test method differential pressure method
GB/T 3923.2 Textile fabrics - Tensile properties - Part 2
Determination of tear resistance of GB/T 5573 tape
FZ/T 01010 Determination of peeling strength of coated fabric coatings
HB5469 Combustion test method for non-metallic materials inside civil aircraft cabin
Aircraft airborne equipment -- Environmental conditions and test methods - Part 11. mould test
Aircraft airborne equipment -- Environmental conditions and test methods - Part 12. Salt spray test
CTSO-C85a life-saving positioning light
3 Classification
Life jackets are divided into four categories. "adult", "adult/child", "child" and "child" (see Table 1).
4 Technical requirements
4.1 Performance
4.1.1 Error prevention
When the life jacket is worn back, the life jacket should be able to guarantee the intended function.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36508-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
FZ/T 01010-2012 — Coated fabrics. Determination of coating peeling strength
GB/T 1038.1-2022 — Plastics - Film and sheeting - Determination of gas-transmission rate - Part 1: Differential-pressure methods
GB/T 1038.2-2022 — Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure methods
Secure payment via Stripe
Payments accepted
GB/T 36508-2018
$295.00