GB/T 34379-2017Technical specifications for mechanized production of corn (English PDF)
玉米全程机械化生产技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34379-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34379-2017 is the English-translated version of 玉米全程机械化生产技术规范.
GB/T 34379-2017 is the Chinese standard "Technical specifications for mechanized production of corn". Its scope clause reads: This standard specifies the maize mechanized production of land preparation, sowing, field management, harvesting, drying and drying, straw processing and other major operations Technical requirements of the link.
This standard applies to the northeastern North China spring corn area, Huanghuaihai summer corn area, southwest mountain corn area and northwest dryland corn area typical production Under the corn mechanized production operations.
This standard does not apply to silage, seed and fresh corn mechanized production operations. Note.
The North-East China Spring Corn Zone includes Heilongjiang, Jilin, Liaoning, eastern Inner Mongolia, northern Beijing and northern Hebei; the Yellow-Huaihai Summer Corn Zone includes Henan, East, Tianjin, most of Beijing, southern Hebei, southern Shanxi, Shaanxi Guanzhong, northern Anhui and northern Jiangsu; southwest of the mountain corn area including Sichuan, Chongqing, cloud South, Guizhou, Guangxi, Hubei and Hunan provinces west; northwest dryland maize areas including Gansu, Ningxia, Xinjiang, northern Shanxi, northern Shaanxi and Inner Mongolia west. Its clauses include species selection; plowing the land.
Found what you need?
Document preview — GB/T 34379-2017
National Standard of the People's Republic of China
- ICS
- 65.060.01
- Classification
- B 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 species selection
- 4 plowing the land
1 Scope
This standard specifies the maize mechanized production of land preparation, sowing, field management, harvesting, drying and drying, straw processing and other major operations
Technical requirements of the link.
This standard applies to the northeastern North China spring corn area, Huanghuaihai summer corn area, southwest mountain corn area and northwest dryland corn area typical production
Under the corn mechanized production operations.
This standard does not apply to silage, seed and fresh corn mechanized production operations.
Note. The North-East China Spring Corn Zone includes Heilongjiang, Jilin, Liaoning, eastern Inner Mongolia, northern Beijing and northern Hebei; the Yellow-Huaihai Summer Corn Zone includes Henan,
East, Tianjin, most of Beijing, southern Hebei, southern Shanxi, Shaanxi Guanzhong, northern Anhui and northern Jiangsu; southwest of the mountain corn area including Sichuan, Chongqing, cloud
South, Guizhou, Guangxi, Hubei and Hunan provinces west; northwest dryland maize areas including Gansu, Ningxia, Xinjiang, northern Shanxi, northern Shaanxi and Inner Mongolia west.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 4404.1 seeds for food crops Part 1. Cereals
NY/T 503 single grain (precision) planter work quality
NY/T 1276 Guidelines for the safe use of pesticides
NY/T 1355 Corn Harvester Operating Quality
Technical specifications for mechanized conservation tillage in dryland maize
3 species selection
3.1
Should be adopted through the national or provincial-level validation, and by the local agricultural sector to promote the dense weather lodging, suitable for mechanized operation of high yield
Production of corn varieties.
3.2
Selection should be selected, grading treatment of corn seeds. Corn seed quality should be consistent with the provisions of GB 4404.1, and the germination rate should not
Less than 95%.
3.3
corn seeds should be coated. Uncoated seeds, before sowing should be based on the perennial pest situation, targeted
Select the prevention and treatment of seed dressing.
4 plowing the land
4.1
should be based on the local planting patterns, agronomic requirements, soil conditions and surface straw cover conditions, choose mechanical farming methods and operations
Industry time.
4.2
Subsoiling operation should be carried out in autumn, deep pine should be able to break the depth of the bottom plow. Northeast North China spring corn depth should not be less than 30cm depth.
Tractor power should be based on different depth of cultivation, soil resistance and deep pine machine specifications matching.
4.3
base fertilizer should be applied. Fertilizer can be used after the first turnover or edge tillage edge fertilizer, fertilizer should be spread evenly, the amount of fertilizer should be consistent
Local agronomic requirements.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34379-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34379-2017
$85.00