GB/T 34023-2017Code of practice for the safety use of builders' hoists (English PDF)
施工升降机安全使用规程
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34023-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 34023-2017 is the English-translated version of 施工升降机安全使用规程.
GB/T 34023-2017 is the code of practice for the safe use of builders' hoists.
It specifies the requirements for the installation, alteration, dismantling, maintenance, inspection and operation of a builder's hoist, including the hoistway protection devices, and gives advice and guidance on managing that work, together with the responsibilities of the supplier and of the other parties and personnel involved and the terms on which they hold their positions.
It sets out the types of hoist, the hazards associated with the use of a hoist, the management of installation, alteration, dismantling, inspection, operation and maintenance, the staff and their training, the choice of hoist and the site conditions it requires, the determination of the erection scheme and of the installation position, the equipment for the hoistway enclosure and the landing decks, the handover, operation, use, maintenance and inspection of the hoist, and its thorough examination and testing.
Annex A illustrates builders' hoists and Annex B gives the inspection and maintenance items, tables and reports.
It applies to power-driven builders' hoists installed temporarily on a construction site, and it does not apply to guided climbing work platforms or to permanently installed lifts; the safety and technical requirements themselves remain those of GB/T 26557, GB/T 10054.1, GB/T 10054.2 and JB/T 13031.
It cites GB/T 5972, GB/T 10054.1, GB/T 10054.2, GB/T 15706, GB/T 16856, GB/T 16895.6, GB/T 16895.7, GB/T 26557 and JB/T 13031. It was issued on 12 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 34023-2017
National Standard of the People's Republic of China
- ICS
- 91.220
- Classification
- J 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Lifts type
- 5 Danger associated with the use of the lift
- 6 Lifts Installation, Change, Disassembly, Inspection, Operation and Maintenance Management
- 7 staff and training
- 8 Lifts Options and Related Site Conditions
- 9 Lifts to determine the establishment of the program and installation location
- 10 Lifts Installation, Modification, Removal, and Equipments for Elevator Corridor and Deck
- 11 Handover, operation, use, maintenance and inspection of the lift
- 12 Full inspection and testing of the lift
- Appendix A (Informative) Example Construction Lifts
- Appendix B (Informative) Inspection/Maintenance Items, Inspection/Maintenance Tables and Reports
- References
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the requirements for the installation, alteration, demolition, maintenance, inspection and operation of construction lifts (including hoistway protection devices) Out of these job management advice and guidance, including those involved in the use of these units, the responsibility of the supplier and the relevant personnel responsibilities And terms of office.
This standard applies to temporary installation of power-driven construction of the construction site using the construction lift (hereinafter referred to as "lift").
Note 1. The definition of construction lifts see GB/T 26557, GB/T 10054.1, GB/T 10054.2, JB/T 13031.
Note 2. According to China's current special equipment safety supervision requirements, the rated lifting capacity greater than or equal to 0.5t (ie rated load greater than or equal to 5kN) of the lift Crane belonging to special equipment.
Note 3. For the reference to this standard and related units, personnel and matters, including the responsibilities and obligations of the relevant units and personnel, abide by the "People's Republic of China There are other stipulations and requirements for the State Special Equipment Safety Law, "Regulations for the Safety Supervision of Lifting Appliances" and "Regulations for the Supervision and Administration of Construction Lifting Machinery Safety".
Note 4. This standard does not include the safety and technical requirements, the implementation of GB/T 26557, GB/T 10054.1, GB/T 10054.2, JB/T 13031 requirements.
This standard does not apply to the guide climb climbing platform and permanent installation of the elevator.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5972 crane rope maintenance, maintenance, inspection and scrap
GB/T 10054.1 Cargo construction lifts - Part 1: Lifts accessible to carriers
GB/T 10054.2 Cargo Construction Lifts Part 2 Tilting Lifts with Inaccessible Vehicles
GB/T 15706 General Principles of Mechanical Safety Risk Assessment and Risk Reduction
GB/T 16856 mechanical safety risk assessment implementation guidelines and methods for example
GB/T 16895.6 low-voltage electrical installations Part 5-52. Selection and installation of electrical equipment cabling system
GB/T 16895.7 low-voltage electrical installations Part 7-704 of the requirements of special installations or places Construction and demolition of places of electrical Device
GB/T 26557 cage with a vertical orientation of the dual-use construction and lifts
JB/T 13031 Towing Construction Lifts
3 Terms and definitions
GB/T 26557, GB/T 10054.1, GB/T 10054.2, JB/T 13031 and defined by the following terms and definitions apply to this document.
3.2 The person designated by the elevator user responsible for the safe use of the lift and for contacting the supplier's owner.
3.1 Supplier responsible person appointedperson; supplier
Lift supply unit (elevator ownership registration or rental) and/or provide installation and disassembly services, such as the designated unit responsible for the solution Persons who have solved all the problems with the lift and/or the services provided.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5972Cranes - Wire ropes - Care and maintenance, inspection and discard
- GB/T 10054.1Builders' hoists for goods - Part 1: Hoists with accessible platforms
- GB/T 15706Safety of machinery -- General principles for design -- Risk assessment and risk reduction
- GB/T 16856Safety of machinery -- Risk assessment -- Practical guidance and examples of methods
- GB/T 16895.6Low-voltage electrical installations -- Part 5-52: Selection and erection of electrical equipment -- Wiring systems
- GB/T 16895.7Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
GB/T 10054.2
Similar standards
How to Download GB/T 34023-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10054.1-2021 — Builders' hoists for goods - Part 1: Hoists with accessible platforms
GB/T 15706.2-2007 — Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
GB/T 15706-2012 — Safety of machinery -- General principles for design -- Risk assessment and risk reduction
Secure payment via Stripe
Payments accepted
GB/T 34023-2017
$510.00