GB/T 34004-2017Domestic and small-scale catering kitchen combustible gas alarms and sensors (English PDF)
家用和小型餐饮厨房用燃气报警器及传感器
This is a limited preview
Buy now to download the full PDF (40 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34004-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
June 1, 2018
Scope
GB/T 34004-2017 is the English-translated version of 家用和小型餐饮厨房用燃气报警器及传感器.
GB/T 34004-2017 is the Chinese national standard for the combustible gas alarms and sensors used in homes and in small catering kitchens.
It fixes the terms and definitions, the classification and the model designation, the requirements and the test methods, the inspection rules, the marking, the installation and the instruction manual, and the packaging, transport and storage.
It applies to the alarms and sensors that detect gas leaks and the carbon monoxide produced by incomplete combustion in homes and small catering kitchens, and also to the monitoring modules that do the same for household gas burners.
It is built in separate clauses for the alarm, where the general requirements are followed by the special requirements for the small catering kitchen alarm and by the test methods, for the monitoring module, with its materials, structure, performance and test methods, and for the sensor, with its requirements and test methods; the inspection rules distinguish factory inspection from type inspection for the alarm, the monitoring module and the sensor.
It defines the household combustible gas alarm, which senses combustible gas or carbon monoxide with a gas sensor, passes the signal in analogue or digital form to a controller or control circuit and raises an alarm through an actuator or output circuit when the set concentration is exceeded, and the combination alarm, which has both the gas leak and the incomplete combustion functions.
Three normative annexes give the tables matching the test items to the sample numbers of the alarm, the monitoring module and the sensor.
It cites GB/T 2406.2, GB/T 2828.1, GB/T 4208, GB/T 17626.4, GB/T 17626.5 and GB/T 17626.6, along with the standards for cast copper and copper alloys and for the electrostatic discharge and radiated radio-frequency immunity tests. It was issued on 12 July 2017 and has applied since 1 June 2018.
Found what you need?
Document preview — GB/T 34004-2017
National Standard of the People's Republic of China
- ICS
- 91.140
- Classification
- P 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 classification and model
- 4.1 Classification and type of alarm
- 4.2 Classification of monitoring modules
- 5 alarm
- 5.1 General requirements
- 5.2 special requirements for small kitchen kitchen alarm
- 5.3 Test methods
- 5.4 Special requirements for small-scale kitchen and kitchen alarm
- 6 Monitoring module
- 6.1 Materials
- 6.2 Structure
- 6.3 Performance
- 6.4 Test methods
- 7 sensor
- 7.1 Requirements
- 7.2 Test methods
- 8 inspection rules
- 8.1 Factory inspection of alarm
- 8.2 Alarm Type Inspection
- 8.3 Inspection module factory inspection
- 8.4 Monitoring module type inspection
- 8.5 Sensor Type Inspection
- 9 logo, installation and instruction manual
- 9.1 Alarm
- 9.2 Monitoring module
- 9.3 sensor
- 10 Packaging, transportation and storage
- 10.1 Packaging
- 10.2 Transport
- 10.3 Storage
- Appendix A (normative appendix) Sample test item and alarm number correspondence table
- Appendix B (Normative Appendix) Sample Test Item and Monitoring Module Number Corresponding Table
- Appendix C (Normative Appendix) Sample Test Item Correspondence Table with Sensor Number
- Reference
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terminology and definitions, classification and model of household gas alarms and sensors, requirements and test methods, inspection rules, Logo, installation and instruction manual, packaging, shipping and storage.
This standard is applicable to the detection of gas leaks and the detection of gas and incomplete combustion of carbon monoxide produced by household and small kitchen Alarm and sensor.
This standard also applies to the detection of gas leaks and detection of carbon monoxide produced by incomplete combustion of household gas burners. Module.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
Cast copper and copper alloys
GB/T 2406.2 Plastics - Determination of combustion behavior by oxygen index method - Part 2: Room temperature test
GB/T 2828.1 Sampling inspection procedures Part 1: Batch inspection sampling plan for retrieval by quality limit (AQL)
GB/T 4208 enclosure protection class (IP code)
Electromagnetic compatibility - Test and measurement techniques - Electrostatic discharge immunity test
Electromagnetic compatibility - Testing and measurement techniques - Radiofrequency electromagnetic field radiation immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques Electrical fast transient burst immunity test
GB/T 17626.5 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test
GB/T 17626.6 Electromagnetic compatibility test and measurement techniques Radio frequency field sensing conducted disturbances Immunity
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Household gas alarm
With gas leakage alarm function and/or equipment with incomplete combustion alarm function. Detect the surrounding ring by gas sensor In the case of combustible gases and/or carbon monoxide gas, through the sampling circuit, the detection signal with analog or digital transmission to the controller or control Circuit, when the combustible gas and/or carbon monoxide gas concentration exceeds the controller or control circuit set value, the controller through the actuator or The execution circuit issues an alarm signal and/or alarm output signal.
3.2 Composite alarm
With gas leak alarm and gas combustion alarm is not complete the two functions of the alarm.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 40 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2406.2Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4208Degrees of protection provided by enclosures (IP code)
- GB/T 17626.4Electromagnetic compatibility -- Testing and measurement techniques -- Electrical fast transient/burst immunity test
- GB/T 17626.5Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
- GB/T 17626.6Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields
Similar standards
How to Download GB/T 34004-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17626.4-1998 — Electromagnetic compatibility--Testing and measurement techniques--Electrical fast transient/burst immunity test
GB/T 17626.4-2008 — Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.4-2018 — Electromagnetic compatibility -- Testing and measurement techniques -- Electrical fast transient/burst immunity test
GB/T 34004-2017
$570.00