GB/T 33836-2017Plane sealing gaskets for heat energy device (English PDF)

1 Scope

This standard specifies the terms and definitions of the flat gasket (hereinafter referred to as "gasket") for thermal energy devices, and the structure of the gasket

Requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to thermal devices such as internal combustion engines (such as mobile cars and stationary generators, etc.) and other thermal devices connected to the Department and phase

Off the pipe, the sealing gasket at the interface.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Specification for packaging and storage charts

Rubber, vulcanized or thermoplastic elastomers - Determination of tensile stress - strain properties GB/T GB/T 531.1-2008 Vulcanized rubber or thermoplastic rubber - Test method for hardness - Part 1. Shore 's hardness method (Shao

Hardness)

Small and medium - power internal combustion engines - Part 1. General technical conditions GB/T 1147.1-2007

Small and medium - power internal combustion engines - Part 2. Test methods GB/T GB/T 1682-2014 vulcanized rubber - Determination of low - temperature brittleness - Single - sample method

Vulcanized rubber or thermoplastic rubber - Test method for resistance to liquids GB/T 1690-2010

Determination of adhesion of paint film GB/T 1720-1979

GB/T 3512-2014 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test

Metallic materials - Vickers hardness test - Part 1. Test methods GB/T 4340.1-2009

GB/T 6072.1-2008 Reciprocating internal combustion engine performance - Part 1. Calibration and testing of power, fuel consumption and oil consumption

Method Additional requirements for general purpose engines

Paints and varnishes - Determination of film hardness by pencil method GB/T 6739-2006

GB/T 7759.1-2015 Determination of compression set of vulcanized rubber or thermoplastic rubber - Part 1. Determination of compressive permanent deformation at room temperature and high temperature

Under conditions

Paints and varnishes - Tests for paint film GB/T 9286-1998

Test method for reliability test of automobiles GB/T 12678-1990

Paints and varnishes - Determination of film thickness GB/T 13452.2-2008

Hand - held torque wrenches - General technical requirements GB/T 15729-2008

Test method for reliability of automobile engines GB/T 19055-2003

GB/T 20671.1-2006 Classification and test methods for nonmetallic gasket materials - Part 1. Classification of nonmetallic gasket materials system

GB/T 20671.4-2006 Classification and test methods for nonmetallic gasket materials - Part 4. Test method for gasket sealing

JB/T 5135.3-2013 General purpose small gasoline engine - Part 3. Reliability, durability test and evaluation method

JB/T 7293.5-2015 Internal combustion engine bolts and nuts - Part 5. Cylinder head bolts technical conditions

JB/T 7293.7-2015 Internal combustion engine bolts and nuts - Part 7. Cylinder head nuts and flywheel nuts - Technical conditions […]