GB/T 33454-2016Operation specification of storage rack (English PDF)

3.1 Storage shelves storagerack

Steel shelves for storage of goods in warehouses.

4.1

shelves should be accepted after passing, before use.

4.2

Before making any changes to the shelf, the license of the shelf supplier shall be obtained.

4.3

all the operating personnel of the shelves should be trained after passing, can be posts; forklift operators should have a corresponding operating permit.

4.4

Professional installation personnel for non-storage shelves are prohibited from climbing shelves.

4.5

shelves should be set up warning signs to display its rated load and loading methods and other information. When there are multiple different bearers in the same storage area

The ability of the shelves, the shelves should be in the local area eye-catching location, showing the corresponding load and load the corresponding way.

4.6

loading should be carried out according to the provisions of the supplier loading, the unit load should not be greater than the rated load.

4.7

The logistics apparatus should be in good working condition and its size and type should match the shelf structure.

Note. The logistics equipment refers to the pallet, the bin, the storage cage, the stacking frame and so on uses the forklift to carry the logistics turnover implement.

4.8

Unless otherwise considered in the design of the shelf, the actual dimensions of the unit load shall not exceed the safe distance required for safe operation of the shelves and shall not

Figure 1 shows the incorrect load arrangement.

4.9

The operating area of the shelf or area should ensure that there are no obstructions.

4.10

Protective measures should be provided on the shelves and around them to avoid damage to the shelves and operators.

4.11

Forklifts should be driven at any time to avoid damage to the shelves.

4.12

When any accidental damage occurs on the shelves, the operator should immediately set up the protective enclosure or warning signs.