Valid

GB/T 32464-2015Internal quality control for chemical analysis laboratories applying control graphic (English PDF)

化学分析实验室内部质量控制利用控制图核查分析系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (42 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32464-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2015

Implementation date

July 1, 2016

Scope

GB/T 32464-2015 is the English-translated version of 化学分析实验室内部质量控制利用控制图核查分析系统.

GB/T 32464-2015 is the Chinese standard "Internal quality control for chemical analysis laboratories applying control graphic".

Its scope clause reads: This standard specifies the general principles of the use of the control chart verification analysis system for chemical analysis laboratories, the type of control charts and their application Fixed control limit, the basic data preprocessing, the use of control chart verification and analysis system of the working procedures, the use of control charts, control the number of quality control According to other uses.

Note. The laboratories referred to in this standard refer to chemical analysis laboratories. Its clauses include normative reference documents; terms and definitions; acronyms and symbols.

Found what you need?

Document preview — GB/T 32464-2015

National Standard of the People's Republic of China

ICS: 03.120.10
Classification: A 00

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
Introduction
1 Scope
2 normative reference document
3 Terms and definitions
4 acronyms and symbols
5 quality requirements of test results
6 General principles for using the control chart verification analysis system
7 control chart type and its scope of application
7.1 X Control Figure
7.2 I Control Figure
7.3 R control Figure
7.4 MR control Figure
7.5 Index Weighted Moving Average (EWMA) Control Figure
8 Set the control limit
8.1 Control limits and setting principles
8.2 Control limit and center line setting method of X control chart
8.3 Control limits and centerline of the very poor control chart (R control chart) or r% control chart
8.4 Control limit setting for multi-component detection
9.1 General requirements
9.2 Normality test
9.3 judgment and processing of outliers
11.1 Initial control chart
11.2 Recording Procedure
11.3 Control Chart Use
11.4 Verification Control Chart Quality
11.5 Control limits and centerline assessment and modification
11.6 record
11.7 Control chart parameter merging
12 Other uses of quality control data in the control chart
12.1 Uncertainty in measurement of assessment methods
12.4 Personnel comparison or assessment
12.5 Inspection of environmental parameters and similar parameters
Appendix B (Informative Annex) Example of Control Chart Establishment and Application
Appendix C (informative) Control limits and centerline setting examples
Appendix D (Informative Annex) Statistical Analysis Critical Value Table

1 Scope

This standard specifies the general principles of the use of the control chart verification analysis system for chemical analysis laboratories, the type of control charts and their application

Fixed control limit, the basic data preprocessing, the use of control chart verification and analysis system of the working procedures, the use of control charts, control the number of quality control

According to other uses.

Note. The laboratories referred to in this standard refer to chemical analysis laboratories.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 3358.1-2009 Statistical terms and symbols - Part 1. General statistical terms and terms for probabilities

Statistical vocabulary and symbols - Part 2. Application statistics GB/T 3358.2

Statistical vocabulary and symbols - Part 3. Experimental design GB/T 3358.3

GB/T 3361-1982 Statistical processing and interpretation of data Comparison of two mean values in paired observations

Statistical processing and interpretation of data GB/T 4882-2001 Verification of normality

Statistical processing and interpretation of data GB/T 4883-2008 Judgment and processing of outliers of normal samples

GB/T 6379.1-2004 Accuracy (accuracy and precision) of measurement methods and results - Part 1. General and definitions

Analytical chemistry terms GB/T 14666-2003

GB/T 15000.2-1994 Working Guidelines for Standard Samples (2) Terms and Definitions for Standard Samples

Quality management systems - Fundamentals and terminology GB/T 19000-2008

Conformity assessment vocabulary and general principles GB/T 27000-2006

GB/T 27407-2010 Laboratory Quality Control Using Statistical Quality Assurance and Control Charts Technical Evaluation Analysis Measurement Systems performance

GB/T 32465-2015 Chemical analysis methods - Validation and internal quality control requirements

GB/T 32467-2015 Chemical analysis methods Verification and internal quality control Terms and definitions

ISO 11843-1..2008 Testing Capability - Part 1. Terms and definitions

3 terms and definitions

GB/T 3358.1-2009, GB/T 3358.2-2009, GB/T 3358.3-2009, GB/T 6379.1-2004, GB/T 14666-

2003, GB/T 15000.2-1994, GB/T 19000-2008, GB/T 27000-2006, GB/T 32467-2015, ISO 11843-1.

The terms and definitions defined in.2008 apply to this document.

4 acronyms and symbols

This standard uses the abbreviations and symbols in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 11843-1

Cited by

GB/T 43449-2023Forensic sciences—Specifications for quality control in toxicology laboratory

Similar standards

GB/T 27401-2026|GB/T 27402-2026|GB/T 27403-2026|GB/T 27404-2026|GB/T 27405-2026|GB/T 27406-2025

How to Download GB/T 32464-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.