GB/T 27407-2010Quality control in laboratories applying statistical quality assurance and control charting techniques to evaluate analytical measurement system performance (English PDF)
实验室质量控制 利用统计质量保证和控制图技术 评价分析测量系统的性能
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27407-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
July 1, 2011
Scope
GB/T 27407-2010 is the English-translated version of 实验室质量控制 利用统计质量保证和控制图技术 评价分析测量系统的性能.
GB/T 27407-2010 is the Chinese standard "Quality control in laboratories applying statistical quality assurance and control charting techniques to evaluate analytical measurement system performance".
Its scope clause reads: This standard provides the statistical quality control program design and operation of the program for stability analysis of continuous monitoring under test measurement system, fine Density and performance bias.
This standard applies to uniform and stable materials to produce a continuous measurement of stable numerical results measurement systems, laboratory test methods, the same special Under the measure by GB/T 27408 bias after correction between the two measurement systems to monitor the difference.
This standard applies to measure system performance in a state of statistical control under the assumption of normality models to describe and predict. Its clauses include terms, definitions and symbols.
Found what you need?
Document preview — GB/T 27407-2010
National Standard of the People's Republic of China
- ICS
- 03.120.30
- Classification
- A 41
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and symbols
- 4 standard sample
- 4.1 precision measurement system to establish and monitor the quality control sample using
- 4.2 Verification standard sample measurement system accuracy using
- 4.3 Measuring system verification audit confirmed using 5 samples
- 5 single analytical measurement systems quality assurance (QA) program
- 5.1 Overview
- 5.3 Accuracy monitor
- 5.4 The test conditions and the frequency
- 5.5 measurement system precision and bias performance evaluation
- 7 5.6 Proficiency Testing
- 5.7 Measurement system independent confirmation
- 6 test results pretreatment evaluation and interpretation
- 6.1 Overview
- 6.3 Control
- 6.5 Control Chart explanation
- 7 measuring system performance assessment 10 Precision and Bias
- 7.1 Quality control samples tested intermediate precision estimate
- 7.2 single verification standard samples of several tests measuring system biased estimate
- 8 measure system performance estimates Ack audit sample use
- Appendix A (normative appendix) SQC Technology
- Appendix B (normative) Statistical Table 28 value
- References
1 Scope
This standard provides the statistical quality control program design and operation of the program for stability analysis of continuous monitoring under test measurement system, fine
Density and performance bias.
This standard applies to uniform and stable materials to produce a continuous measurement of stable numerical results measurement systems, laboratory test methods, the same special
Under the measure by GB/T 27408 bias after correction between the two measurement systems to monitor the difference.
This standard applies to measure system performance in a state of statistical control under the assumption of normality models to describe and predict.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3358.2-2009 Statistics Vocabulary and symbols - Part 2. Applied Statistics
GB/T 4889 Statistical processing and interpretation of the normal distribution with mean and variance estimation test
General principles and statistical methods GB/T 15000.3-2008 standard samples for the work (3) standard sample set value
GB/T 15483.1 ability to use inter-laboratory comparison of verification - Part 1. Development and operation of proficiency testing schemes
GB/T 19000 Quality management systems Fundamentals and vocabulary
GB/T 27025 testing and calibration laboratories General requirements
Evaluation of the effectiveness of the linear relationship between the GB/T 27408 laboratory quality control of non-standard test method
3 Terms, definitions and symbols
GB/T 3358.2, GB/T 15000.3 and GB/T 15483.1 established in the following terms, definitions and symbols apply to this standard.
3.1 Terms
3.1.1 Accepted reference value acceptedreferencevalue; ARV
Standard values for comparison after consultation agreed.
NOTE. Accept a reference value derived from.
a) based on scientific principles or theoretical values determined value;
b) certification based on the specified value or values of the experimental work of some national or international organization;
c) based on scientific or engineering organizations agree experimental work under the auspices of the value or the value of certification;
d) when a) b) c) can not be obtained, then use the expected value, which specifies the set of measurements mean.
[Quoted from GB/T 3358.2-2009]
3.1.2 Accuracy
Test results or measurement results and the degree of consistency between the true value.
Note 1. In practice, the true value with the accepted reference value instead.
GB/T 2829-2025 | GB/T 6379.6-2009 | GB/T 2828.2-2008 | GB/T 40681.7-2026 | GB/T 16307-2026 | GB/T 27408-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 27420-2018Conformity assessment—Application guide for evaluation and expression of uncertainty in biological sample measurement
- RB/T 141-2018Evaluation of measurement uncertainty in the chemical testing field. Applying quality control and method validation data to evaluate measurement uncertainty
- GB/T 32464-2015Internal quality control for chemical analysis laboratories applying control graphic
- SN/T 1492-2015Standard practice for laboratory bias evaluation using single test result from standard material
- GB/T 29858-2013Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
- SN/T 3590-2013Standard guide for accountability and quality control in the chemical analysis laboratory
Similar standards
How to Download GB/T 27407-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 27407-2010
$455.00