GB/T 31960.13-2024Technical specification of power energy efficiency monitoring system—Part 13: Field handheld device specifications (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is part 13 of GB/T 31960 Technical Specification for Power Energy Efficiency Monitoring System. GB/T 31960 has published the following part.

— Part 1: General;

— Part 2: Master station functional specification;

— Part 3: Communication protocol;

— Part 4: Substation functional design specifications;

— Part 5: Master station design guidelines;

— Part 6: Technical requirements for power energy efficiency information centralization and interactive terminals;

— Part 7: Technical requirements for power energy efficiency monitoring terminals;

— Part 8: Safety protection specifications;

— Part 9: System inspection specification;

— Part 10.Inspection specification for power energy efficiency monitoring terminals;

— Part 11.Power energy efficiency information concentration and interactive terminal inspection specification;

— Part 12.Construction Guidelines;

— Part 13.Technical specifications for field handheld equipment.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed and coordinated by the China Electricity Council.

This document was drafted by: China Electric Power Research Institute Co., Ltd., Hunan Wasion Information Technology Co., Ltd., State Grid Jibei Electric Power Co., Ltd.

Company, Yuanguang Software Co., Ltd., State Grid Corporation of China, Nanjing Linyang Electric Power Technology Co., Ltd., Shanghai Yidian Building Technology Co., Ltd.

Company, Hangzhou Guge Information Technology Co., Ltd., China Electronics Technology Group Corporation No. 50 Research Institute, State Grid Hunan Electric Power Co., Ltd., State Grid New Energy Technology Co., Ltd.

Xinjiang Electric Power Company, Nanjing Xinlian Electronics Co., Ltd.

The main drafters of this document are: Zhong Ming, Ma Liang, Wen Hui, Yan Huaguang, Li Li, Sun Beibei, Chen Songsong, Zhang Xinhe, Zhang Xinghua, Wang Jinming, Jiang Limin, He Guixiong, Cheng Ling, Zhang Bing, Meng Junxia, Wang Xin, Liu Xiaoxiao, Tang Yanmei, Li Xing, Liu Kaicheng, Jin Lu, Yan Maojian.

Introduction

In order to further standardize and guide the construction of power energy efficiency monitoring system, promote the marketization and industrialization of power energy saving industry, and improve the The standardization level of energy efficiency monitoring system is to meet the needs of improving energy efficiency, reducing energy consumption per unit of gross domestic product (GDP) and supporting energy conservation in China.

This series of standards is compiled to meet the needs of implementing policies such as assessment and subsidies.

GB/T 31960 comprehensively covers the main station, substation, terminal, communication, operation, inspection and testing, safe communication and other business links, and puts forward a unified The technical requirements are intended to provide a reference for the design, construction, operation, maintenance, testing and acceptance of power energy efficiency monitoring systems. constitute.

— Part 1: General. The purpose is to standardize the general technical requirements of the power energy efficiency monitoring system and determine the general The overall architecture, technical system and basic functions provide compilation guidance for the subsequent parts.

— Part 2: Master station function specification. The purpose is to standardize the overall requirements of the national, provincial and municipal master stations of the power energy efficiency monitoring system, Functional and technical requirements, etc., provide standardized and reasonable guidance for the design, development and operation and maintenance of the main station of the power energy efficiency monitoring system.

— Part 3: Communication protocol. The purpose is to standardize the communication format and transmission rules and guide the various parts of the power energy efficiency monitoring system Divided into communication and interaction methods.

— Part 4: Substation functional design specifications. The purpose is to standardize the functional structure, performance indicators, etc. of the power energy efficiency monitoring system substation.

The requirements of the above aspects are met to provide standardized and reasonable guidance for the design, development and operation and maintenance of power energy efficiency monitoring system substations.

— Part 5: Master station design guidelines. The purpose is to standardize the design principles, system architecture, performance indicators, and other aspects of the master station of the power energy efficiency monitoring system.

Standards and safety protection requirements are used to guide the development, construction, operation and maintenance of the master station system.

— Part 6: Technical requirements for power energy efficiency information collection and interactive terminals. The purpose is to clarify the information collection and interactive terminals of power energy efficiency monitoring systems.

The technical requirements and test methods for terminals between collection and interaction are used to guide the manufacture, inspection and use of collection terminals.

— Part 7: Technical requirements for power energy efficiency monitoring terminals. The purpose is to clarify the information collection and perception terminals of the power energy efficiency monitoring system.

The technical requirements and test methods of the end-user are designed according to the site requirements and cost saving to facilitate promotion.

There are five types of terminals, namely, power type, basic power type, harmonic power type and power quality type, which are used to guide the manufacturing, inspection and Use, etc.

— Part 8: Safety protection specification. The purpose is to propose safety protection specifications for the main station, substation and acquisition subsystem of the power energy efficiency monitoring system.

The protection requirements can be used as a basis for guiding the system's security protection construction and security assessment.

— Part 9: System inspection specification. The purpose is to standardize the inspection methods and inspection rules of the power energy efficiency monitoring system, but it does not constitute a system inspection method.

Inspection regulations are set for specific products of the system as a condition for system engineering acceptance and final acceptance to ensure project quality and safety.

— Part 10.Inspection specification for power energy efficiency monitoring terminals. The purpose is to standardize the inspection rules and test procedures for power energy efficiency monitoring terminals.

Methods, etc., can better ensure the safe, economical and stable operation of the terminal and facilitate the promotion of the monitoring terminal.

— Part 11.Inspection specification for power energy efficiency information concentration and interactive terminals. The purpose is to standardize the inspection specification for power energy efficiency information concentration and interactive terminals.

Inspection rules and test methods are established to ensure the safe, economical and stable operation of energy-efficient centralized and interactive terminals, and facilitate the promotion of terminals.

— Part 12.Construction Guidelines. The purpose is to standardize the construction scope, construction principles, and system implementation requirements of the power energy efficiency monitoring system.

Provide guidance for system planning, design, implementation, trial operation and acceptance.

— Part 13.Technical specifications for on-site handheld devices. The purpose is to standardize the technical requirements of on-site handheld devices for power energy efficiency monitoring systems.

Requirements and functional requirements make it easy to perform on-site setup, copying and daily maintenance of terminal equipment.

Technical Specifications for Power Energy Efficiency Monitoring System Part 13.Technical specifications for field handheld equipment

1 Scope

This document specifies the technical requirements, functional requirements, inspection rules, and packaging, storage and Transport requirements and describes the corresponding test methods.

This document is applicable to the design, manufacture, application and detection of on-site handheld equipment for power energy efficiency monitoring systems. Other similar terminals can refer to this document. use.

2 Normative references

GB/T 191

GB/T 2423.1

GB/T 2423.2

GB/T 2423.3

GB/T 2423.10

GB/T 2829

GB/T 4208

GB/T 4798.1-2019

GB/T 4798.2-2021

GB/T 13384

GB/T 17626.2

GB/T 17626.3

GB/T 17626.8

GB/T 31960.3

GB/T 31960.8

3 Terms and definitions

The following terms and definitions apply to this document.