GB/T 31960.3-2015Technical specification of power energy efficiency monitoring system—Part 3: Communication protocol (English PDF)
电力能效监测系统技术规范 第3部分：通信协议
This is a limited preview
Buy now to download the full PDF (100 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31960.3-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
April 1, 2016
Scope
GB/T 31960.3-2015 is the English-translated version of 电力能效监测系统技术规范 第3部分：通信协议.
GB/T 31960.3-2015 is the Chinese standard "Technical specification of power energy efficiency monitoring system—Part 3: Communication protocol".
Its scope clause reads: GB/T 31960 provisions of this part of the energy efficiency of electric power monitoring system (hereinafter referred to as the "System") of the main (sub) power station and energy efficiency information set The interaction between the terminal (hereinafter referred to as "centralized and interactive terminals"), the power of energy efficiency information is centralized and interactive terminal and the power of energy efficiency monitoring terminal Data transmission frame format (hereinafter referred to as the "Monitoring Terminal") between the data encoding and transmission rules.
This section applies to point-to-multi-point collinear and a multipoint communication, the power of energy efficiency monitoring system master (sub) energy efficiency of the power station Centralized information and interactive terminal, power and energy-efficient centralized information exchange terminal for monitoring the energy efficiency of electric power from the main terminal to perform questions and answers, as well as in the letter Power Road, with the support of energy efficiency information is centralized and interactive terminal, power terminal is actively monitoring energy efficiency uploads communications. Its clauses include terms, definitions and abbreviations.
Found what you need?
Document preview — GB/T 31960.3-2015
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- K 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 4 structure
- 5 transmission interface
- 6 Main (sub) station and the centralization and interactive terminal communication protocol
- 7 Concentration and interactive terminal and monitoring terminal communication protocol
- Appendix A (normative) definition of data format
- Appendix B (normative) state the amount of data in the data format
- Annex C (normative) harmonic Data Format
- Annex D (normative) Non-electrical data in the data format
- Appendix E (normative) event code ERC and event log data format
- Annex F (normative) to confirm/deny information code
- Annex G (normative) the amount of non-electrical type
- Annex H (normative) software and hardware version information
- Annex I (normative appendix) IP Address Data Format
- Appendix J (normative) Symbols and Abbreviations
1 Scope
GB/T 31960 provisions of this part of the energy efficiency of electric power monitoring system (hereinafter referred to as the "System") of the main (sub) power station and energy efficiency information set
The interaction between the terminal (hereinafter referred to as "centralized and interactive terminals"), the power of energy efficiency information is centralized and interactive terminal and the power of energy efficiency monitoring terminal
Data transmission frame format (hereinafter referred to as the "Monitoring Terminal") between the data encoding and transmission rules.
This section applies to point-to-multi-point collinear and a multipoint communication, the power of energy efficiency monitoring system master (sub) energy efficiency of the power station
Centralized information and interactive terminal, power and energy-efficient centralized information exchange terminal for monitoring the energy efficiency of electric power from the main terminal to perform questions and answers, as well as in the letter
Power Road, with the support of energy efficiency information is centralized and interactive terminal, power terminal is actively monitoring energy efficiency uploads communications.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2260-2007 People's Republic of China administrative division code
GB/T 18657.1-2002 Telecontrol equipment and systems - Part 5 Transmission protocols - Section 1 Transmission frame formats
DL/T 645-2007 multifunction energy meter communication protocol
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Tasks task
Electricity provision of energy efficiency information is centralized and interactive terminals or electrical energy efficiency monitoring terminal to perform the desired operation at a specified time or condition sequence.
3.1.2 Measuring point
It can be measured with a measuring device or a centralized information and monitoring terminal electrical connections of interactive terminals only one set of measurements, when the matter
The same electrical connections on a plurality of processing means is measured, or measured by a device but is delivered to the terminal through a variety of ways
When, in accordance with a plurality of measuring points count, each measurement point has a unique positioning logic coding, is the means of the terminal configuration parameters, data applications
Unique object identifier.
3.1.3 Information points
Represent parameters or data object information, such as the electrical measurement point number, non-electrical measuring point number, the monitoring terminal number, task number.
3.1.4 Info informationtype
A parameter representing classified information or data, a class can be a parameter information or data may be a set of parameters or data […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 100 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31960.3-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 31960.1-2015 — Technical specification of power energy efficiency monitoring system—Part 1: The general rules
GB/T 31960.10-2016 — Technical specification of power energy efficiency monitoring system—Part 10: Test specification of power energy efficiency monitor terminal
GB/T 31960.11-2016 — Technical specification of power energy efficiency monitoring system—Part 11: Test specification of power energy efficiency information collection and exchange terminal
Secure payment via Stripe
Payments accepted
GB/T 31960.3-2015
$1,715.00