GB/T 31070.2-2018Building intercom systems—Part 2: Technical requirements for digital building intercom systems (English PDF)
楼寓对讲系统 第2部分:全数字系统技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31070.2-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
July 1, 2019
Scope
GB/T 31070.2-2018 is the English-translated version of 楼寓对讲系统 第2部分:全数字系统技术要求.
GB/T 31070.2-2018 sets the technical requirements for all-digital building intercom systems, in which every audio and video signal is processed digitally and carried over a wired digital transmission network.
It covers the system structure, basic and extended functions and the configuration management system, and performance requirements for audio and video characteristics, power supply voltage adaptability, environmental adaptability, safety, electromagnetic compatibility, network and information security, and marking and mechanical structure.
For each of these it gives a test method, then sets out the accompanying documentation and the inspection rules, with test categories, sampling and decision rules.
It defines terms such as audio delay, intercom terminal and audio switching time, and applies to building intercom systems using digital processing technology. It was issued on 28 December 2018 and has applied since 1 July 2019.
Found what you need?
Document preview — GB/T 31070.2-2018
National Standard of the People's Republic of China
- ICS
- 13.310
- Classification
- A 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 4 System structure
- 5 Functional requirements
- 5.1 Basic functions
- 5.2 Extended function
- 5.3 Configuring the Management System
- 6 Performance requirements
- 6.1 Audio Features
- 6.2 Video Features
- 6.3 Power supply voltage adaptability
- 6.4 Environmental adaptability
- 6.5 Security
- 6.6 Electromagnetic compatibility
- 6.7 Network and Information Security
- 6.8 Marking and mechanical structure
- 7 Test method
- 7.1 Test conditions
- 7.2 Function check
- 7.3 Audio Characteristics Test
- 7.4 Video Characteristics Test
- 7.5 Power supply voltage adaptability test
- 7.6 Environmental Adaptability Test
- 7.7 Safety Test
- 7.8 Electromagnetic compatibility test
- 7.9 Network and Information Security Trial
- 7.10 Marking and mechanical structure test
- 8 Documentation
- 9 Inspection rules
- 9.1 Inspection Category
- 9.2 Test items and sequence
- 9.3 Group Batch Rule
- 9.4 Sampling Rules
- 9.5 Decision Rule
- 9.6 Disposal of nonconforming product
- 9.7 Batch resubmission
Foreword
GB/T 31070 "Building House Intercom System" is divided into 4 parts.
--- Part 1. General technical requirements;
--- Part 2. Technical requirements for all-digital systems;
--- Part 3. Extended application system technical requirements;
--- Part 4. Application Guide.
This part is the second part of GB/T 31070.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This part of GB/T 31070 specifies the system structure, functional requirements, performance requirements, test methods, and descriptions of the all-digital building intercom system. Documents and inspection rules.
This section applies to the building intercom system using digital processing technology.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2828.1-2012 Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches plan
GB/T 2829-2002 Periodic inspection count sampling procedures and tables (applicable to the inspection of process stability)
GB/T 31070.1-2014 Building intercom system Part 1. General technical requirements
ITU-T P.501 Test Signals for Telephone Measurements (Test signals for use in telephonometry)
3 Terms, definitions and abbreviations
3.1 Terms and definitions
The following terms and definitions as defined in GB/T 31070.1-2014 apply to this document.
3.1.1 All-digital building intercom system
All audio and video signals that make up the device use digital processing technology and are based on the cable intercom system of the cable digital transmission network.
3.1.2 Audio delay
The one-way delay time required for the audio signal to be excited from the local intercom terminal to the remote intercom terminal.
3.1.3 Intercom terminal
In the system, a device that can establish a call.
Note 1. Intercom terminals include management machines, guest callers and user receivers.
Note 2. When other devices such as smartphones, tablets, etc. are connected to the system network, they should not be regarded as intercom terminals, but only as extension devices of user receivers.
3.1.4 Echo suppression
The local intercom terminal transmits the voice signal transmitted from the far end to the remote end.
3.1.5 Audio conversion time
The time it takes for the audio transmission channel to switch from one direction to the other.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 31070.1-2014Building intercom systems - Part 1: General technical requirements
Cited by
- GB/T 26718-2024Technical requirements for safety system of urban mass transit
- GB/T 21741-2021General specifications for security system for residential areas
- GB/T 31070.3-2021Building intercom systems—Part 3: Technical requirements for specific applications
- GB/T 31070.4-2018Building intercom systems—Part 4: Application guidelines
Similar standards
How to Download GB/T 31070.2-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 31070.1-2014 — Building intercom systems - Part 1: General technical requirements
GB/T 31070.3-2021 — Building intercom systems—Part 3: Technical requirements for specific applications
Secure payment via Stripe
Payments accepted
GB/T 31070.2-2018
$205.00