GB/T 26935-2011Preparation of steel substrates and paints application for freight containers (English PDF)
集装箱钢材表面处理和涂料施工规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26935-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2011
Implementation date
May 1, 2012
Scope
GB/T 26935-2011 is the English-translated version of 集装箱钢材表面处理和涂料施工规范.
GB/T 26935-2011 is the Chinese standard "Preparation of steel substrates and paints application for freight containers". Its scope clause reads: This standard specifies the common universal container surface before painting steel surface treatment process requirements and test methods, paints construction Norms.
Other types of containers can refer to use. This standard applies to universal container surface treatment and coating construction steel. Its clauses include steel surface treatment requirements.
Found what you need?
Document preview — GB/T 26935-2011
National Standard of the People's Republic of China
- ICS
- 55.180.10
- Classification
- A 85
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 steel surface treatment requirements
- 3.1 raw materials
1 Scope
This standard specifies the common universal container surface before painting steel surface treatment process requirements and test methods, paints construction
Norms. Other types of containers can refer to use.
This standard applies to universal container surface treatment and coating construction steel.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Cut test GB/T 9286-1998 Paints and varnishes
GB 14444 Safety code for painting spray booth safety regulations
Visual assessment of ISO 8501-1 paints and related products - Preparation of steel substrates before application of surface cleanliness - Part 1. uncoated
Steel substrates and of steel substrates after removal of previous coatings Rust grades and preparation grades (Preparationofsteelsubstratesbefore applicationofpaintsandrelatedproducts-Visualassessmentofsurfacecleanliness-Part 1. Rust gradesandpreparationgradesofuncoatedsteelsubstratesandofsteelsubstratesafteroveralremoval ofpreviouscoatings)
ISO 8502-3 Tests for the assessment of surface cleanliness - Part 3 before the paints and related products - steel substrate. coating
Assessment of dust on steel surface coating (pressure-sensitive adhesive tape method) [Preparationofsteelsubstratesbeforeapplicationof paintsandrelatedproducts-Testsfortheassessmentofsurfacecleanliness-Part 3. Assessmentof dustonsteelsurfacespreparedforpainting (pressure-sensitivetapemethod)]
ISO 8503-2 application of paints and related products of steel blast cleaned steel surface roughness characteristics of abrasive jet clean
The method of grading roughness comparison specimens surface treatment method (Preparationofsteelsubstratesbeforeapplicationofpaints andrelatedproducts-Surfaceroughnesscharacteristicsofblast-cleanedsteelsubstrates-Part 2.
Methodforthegradingofsurfaceprofileofabrasiveblast-cleanedsteel-Comparatorprocedure)
ISO 8503-4 before application of paints and related products of steel blast cleaned steel surface roughness characteristics of ISO surface of the wheel
Calibration method and the surface profile silhouette comparator method for measuring stylus instrument Act (Preparationofsteelsubstratesbeforeappli- cationofpaintsandrelatedproducts-Surfaceroughnesscharacteristicsofblast-cleanedsteelsub- strates-Part 4. MethodforthecalibrationofISO surfaceprofilecomparatorsandforthedetermina- tionofsurfaceprofile-Stylusinstrumentprocedure)
3 steel surface treatment requirements
3.1 raw materials
3.1.1
Check whether the steel surface rust, scale and other contaminants.
3.1.2
according to ISO 8501-1, steel rust grade is divided into A, B, C, D four grades, C, D level should not be used.
3.1.3
stubborn deposits remaining on the surface of a large number of steel should not be used.
GB/T 25163-2025 | GB/T 34587-2017 | GB/T 33575-2017 | GB/T 26937.9-2014 | GB/T 26934-2011 | GB/T 26933-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26935-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26935-2011
$195.00