Valid

GB/T 26933-2011Corrugated roof panel for steel general cargo containers (English PDF)

钢制通用集装箱封闭槽型顶板

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26933-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 19, 2011

Implementation date

May 1, 2012

Scope

GB/T 26933-2011 is the English-translated version of 钢制通用集装箱封闭槽型顶板.

GB/T 26933-2011 is the Chinese standard "Corrugated roof panel for steel general cargo containers".

Its scope clause reads: This standard specifies the general steel containers closed grooved ceiling plate (hereinafter referred to as the roof) technical requirements, inspection/test methods, inspection regulations As well as the packaging, labeling, transportation and storage requirements.

This standard applies to GB/T 1413, and the use of grooved roof closed container roof design, production and acceptance. Its clauses include technical requirements.

Found what you need?

Document preview — GB/T 26933-2011

National Standard of the People's Republic of China

ICS
55.180.10
Classification
A 85

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Technical requirements
  • 3.1 plate type, size and tolerance

1 Scope

This standard specifies the general steel containers closed grooved ceiling plate (hereinafter referred to as the roof) technical requirements, inspection/test methods, inspection regulations

As well as the packaging, labeling, transportation and storage requirements.

This standard applies to GB/T 1413, and the use of grooved roof closed container roof design, production and acceptance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1413 series containers - Classification, dimensions and ratings (ISO 668)

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan

GB/T 4171 weathering steel

GB 8923 steel surface before painting Rust grades and grade

Evaluation of GB/T 13288 steel surface before coating roughness level (comparison specimen method)

3 Technical requirements

3.1 plate type, size and tolerance

3.1.1 Plate

Roof according Potou type type I and II, see Figure 1. Typically I type slot number five slot, type II slot number three slot.

3.1.2 Dimensions and tolerances

Roof dimensions and tolerances shown in Table 1, and the graphic label as shown in Figure 1.

Table 1 roof dimensions and tolerances in millimeters

Types of

Length (L) Width (W) height (H) size allow deviation size allow deviation size allow deviation

Thickness (T)

The groove bottom side

Width (a)

Head groove width (B) size allow deviation size allow deviation diagonal

Absolute difference

Value of

S1-S2

Bottom width (C)

Top groove width (H) size allow deviation size allow deviation

I type 2356 ± 1 209 ± 1 20 0-2

2.0

Type II 2372 ± 1

Or 372

± 1 22 0-2

2.0

105 or

± 2 30 0-2 <=2 150 ± 2 110 ± 2

Note. The total length L --- roof; W --- top slot pitch; total height H --- roof; t --- material thickness; a --- edge groove bottom width; b ---

Plane size at the narrowest end; S1-S2 --- Roof diagonal difference; c --- bottom width; h --- groove top width.

GB/T 25163-2025 | GB/T 34587-2017 | GB/T 33575-2017 | GB/T 26937.9-2014 | GB/T 26935-2011 | GB/T 26934-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26933-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26933-2011

$105.00