GB/T 2587-2009General principles for energy balance of equipment using energy (English PDF)
用能设备能量平衡通则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2587-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 8, 2009
Implementation date
December 1, 2009
Scope
GB/T 2587-2009 is the English-translated version of 用能设备能量平衡通则.
GB/T 2587-2009 is the Chinese standard "General principles for energy balance of equipment using energy".
Its scope clause reads: This standard specifies the reference energy balance model energy-using equipment, energy balance calculation, the energy balance test requirements, energy balance calculation Representing the contents and results of the energy balance.
This standard applies to the use of fuel, electricity and heat, and other energy equipment. Its clauses include terms and definitions; energy balance model using equipment.
Found what you need?
Document preview — GB/T 2587-2009
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
- Replacing
- GB/T 2587-1981
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 energy balance model using equipment
1 Scope
This standard specifies the reference energy balance model energy-using equipment, energy balance calculation, the energy balance test requirements, energy balance calculation
Representing the contents and results of the energy balance.
This standard applies to the use of fuel, electricity and heat, and other energy equipment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Quantities and units of thermal GB 3102.4
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Energy input and output devices on the energy balance between the number of inspected for quantitative analysis of energy use.
4 energy balance model using equipment
4.1 Energy balance block diagram using equipment
Energy-using equipment energy balance diagram shown in Figure 1.
Balanced block diagram using equipment Energy
4.2 using equipment energy balance equation
Energy-using equipment energy balance equation by the formula (1).
Er = Ecy + Ecs (1)
Where.
Er --- energy into the energy-using equipment;
Ecy --- effective energy utilization;
Ecs --- energy loss.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 33757.2-2024Energy saving ratio for distributed energy system of combined cooling, heating and power—Part 2: Multi-energies hybrid driven systems
- LY/T 3160-2024Monitoring method of energy conservation in forestry
- LY/T 1286-2022Energy saving monitoring method for shaving dryer
- FZ/T 07017-2021Energy audit method of textile enterprises
- GB/T 14909-2021Technical guidelines for exergy analysis in energy systems
- GB/T 20115.1-2021Basic specifications for industrial fuel fired installations—Part 1: General
Similar standards
Editions of GB/T 2587
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 2587-2009 | General principles for energy balance of equipment using energy | current edition | Current |
| GB/T 2587-1981 | General principles for energy balance of equipment using energy | previous edition | Superseded |
This page sells the current edition, GB/T 2587-2009. Earlier editions are listed for reference only.
How to Download GB/T 2587-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 2587-2009
$85.00