GB/T 22102-2008Preservative-treated wood (English PDF)
防腐木材
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22102-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 27, 2008
Implementation date
December 1, 2008
Scope
GB/T 22102-2008 is the English-translated version of 防腐木材.
GB/T 22102-2008 is the Chinese standard "Preservative-treated wood". Its scope clause reads: This standard specifies the appearance, texture, corrosion protection and other requirements to water-borne preservatives and an organic solvent preservative-treated wood to And test methods and rules, transportation and storage requirements.
This standard is applicable to the construction and decoration, industry, agriculture, mining, shipbuilding, ports, transportation, landscape such as the use of wood preservative. Its clauses include technical requirements.
Found what you need?
Document preview — GB/T 22102-2008
National Standard of the People's Republic of China
- ICS
- 65.020
- Classification
- B 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Technical requirements
- 3.1 Appearance
1 Scope
This standard specifies the appearance, texture, corrosion protection and other requirements to water-borne preservatives and an organic solvent preservative-treated wood to
And test methods and rules, transportation and storage requirements.
This standard is applicable to the construction and decoration, industry, agriculture, mining, shipbuilding, ports, transportation, landscape such as the use of wood preservative.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 144 timber inspection
GB/T 153 conifer sawmills
GB 449 Timber Volume Table
GB 4814 original timber volume table
GB/T 4817 Broadleaf Timber
GB/T 4822 Test sawmills
GB/T 12684-2006 industrial boride analysis
GB 50005-2003 design of timber structures
GB/T 50329-2002 Standard Test Method for wooden structures
LY/T 1636-2005 wood preservative use classification and requirements
SB/T 10383 commercial timber and its products logo
Determination of SB/T 10404-2006 water-borne preservatives and flame retardants main components
Wet ashing method SB/T 10405-2006 wood preservative chemical analysis before
AWPAA5-05 oil analysis contained preservatives standard methods
AWPAA9-01 analysis and standard methods for treating wood preservative treatment solution with X- ray spectroscopy
AWPAA11-93 by atomic absorption spectrometry preservative treated wood treatment solution and standard methods
The method of determination of wood preservative quaternary ammonium compound AWPAA18-05 two-phase titration
Analysis standard preservative treated wood treatment solution AWPAA21-00 and inductively coupled plasma emission spectrometry
Wood preservative and water-borne preservatives in propiconazole and tebuconazole standard methods AWPAA28-05 determined by HPLC Determination of wood preservative and treating solution of 8-hydroxy quinoline copper bromide standard AWPAA29-00 potentiometric titration
AWPAA31-06 measurement and processing of wood preservative treatment solution standard methods azole compounds using gas chromatography
AWPAA36-04 Press potential anti Titration standard wood preservative quaternary amine compound with sodium dodecyl sulfate and Hamming 1622
AWPAA37-05 with sodium tetraphenylborate measured by potentiometric titration with wood preservative and preservative treatment solution quaternary ammonium compound standard
3 Technical requirements
3.1 Appearance
3.1.1
conifer sawn timber dimensions and tolerances according to GB/T 153 regulations, or by the supply and demand sides agreed to perform.
3.1.2
broadleaf sawn timber dimensions and tolerances according to GB/T 4817 regulations, or by the supply and demand sides of the implementation of the agreement.
3.1.3
log size and deviation performed in both supply and demand agreement.
3.1.4
preservative wood surface should be clean, no deposits.
GB/T 19536-2015 | LY/T 1635-2005 | LY/T 1636-2005 | GB/T 27654-2023 | GB/T 27651-2023 | GB/Z 41259-2022 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB 19272-2024Safety for outdoor body-building equipment - General requirements
- GB/T 20239-2023Wooden flooring for gymnasium
- LY/T 3143-2019The labeling for structural and outdoor wood products
- GB/T 37256-2018General technical requirements of building outdoor bar screen
- LY/T 2884-2017Wooden fences
- NB/T 14021-2017Code for pre-drill civil construction for shale gas platform
Similar standards
How to Download GB/T 22102-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 22102-2008
$169.00