GB/T 20865-2017No or little-tillage fertilizes-seeder (English PDF)
免(少)耕施肥播种机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 20865-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 20865-2017 is the English-translated version of 免(少)耕施肥播种机.
GB/T 20865-2017 covers seed drills that sow and apply fertilizer in one pass on fields that are not ploughed or only lightly tilled.
It sets the technical requirements and performance indicators of these machines, their safety requirements, the main requirements for components, the test methods, the inspection rules, and marking, packaging and storage.
Points covered include the spacing between seed and fertilizer, the soil disturbance rate and the qualified rate of sowing depth, indicators for single-seed machines, the safety of the loading platform and the special requirements for power-driven tillage parts, with no-load running tests of rotating and folding parts.
It applies to mechanical and pneumatic no-till and reduced-till fertilizer seeders. It replaces GB/T 20865-2007, was issued on 29 December 2017 and has applied since 1 July 2018.
Found what you need?
Document preview — GB/T 20865-2017
National Standard of the People's Republic of China
- ICS
- 65.060.30
- Classification
- B 91
- Replacing
- GB/T 20865-2007
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 20865-2007 "no-till fertilizer seeder." Compared with GB/T 20865-2007, the main technical content change As follows.
--- Increased less tillage sowing, sowing fertilization joint operating terms (see 3.3 and 3.9);
--- Increasing the requirements of rotating and folding parts (see 4.1.5 and 4.8.2.6);
--- Increased model coding requirements (see 4.1.6);
--- Adjust the distance between the seed fertilizer (see 4.2.2.2 and 4.2.2.2, 2007 edition 4.2.1.4, 4.2.2.4);
--- Increased ground mobilization rate, deep plowing and sowing pass rate requirements (see Table 1, Table 2);
--- Increased single grain seeder part of the technical indicators (see Table 2);
--- Refined loading platform safety technical requirements (see 4.8.1.7);
--- Increasing the special requirements of driven farming parts (see 4.8.2);
--- Increasing non-operating conditions should be able to reliably cut off the power requirements (see 4.8.2.4);
--- Increased rotating and folding parts of the air run test requirements (see 5.2);
--- Increasing the single grain-less (less) plowing and fertilizer seeper performance index formula (see 5.3.3.4);
--- Increased the classification of inspection items (see Table 6 and Table 7);
--- Increased inspection, acceptance test results (see Table 8 and Table 9);
--- Removed the corn grain passing rate, the percentage of empty section of the technical indicators and test methods (see.2007 edition of Table 2 and 5.3.3);
--- Remove the number of paragraphs and empty terms (see.2007 version 3.9 and 3.10).
1 Scope
This standard specifies the no-tillage or less tillage fertilizer seeder technical requirements, performance indicators, safety technical requirements, the main technical requirements for parts and components And test methods and inspection rules, signs, packaging and storage.
This standard applies to mechanical, pneumatic tillage or less tillage fertilizer seeder.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 699-2015 high-quality carbon structural steel
GB/T 1243 short pitch drive precision roller chain and sprocket
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1: Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
Mechanical properties of fasteners - Bolts
Mechanical properties of fasteners nuts
GB/T 5262 Agricultural machinery - Test methods for the determination of the general provisions
GB/T 5669 Rotary knife and knife holder
GB/T 6973 single grain (precision) seeder test methods
GB/T 9239.1-2006 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1: Specification and balance of tolerance test
GB/T 9439 gray cast iron
GB/T 9478 grain seed drill test methods
GB/T 9480 agriculture and forestry tractors and machinery, lawn and horticultural machinery manual preparation rules
Tractors and machinery for agriculture and forestry - Safety requirements - Part 1. General
Agricultural and forestry machinery safety - Part 5. Powered farming machinery
Agricultural and forestry machinery safety - Part 9. Seeding machinery
GB 10396 Tractors and machinery for agriculture and forestry, lawn and garden machinery safety signs and dangerous graphics General
GB/T 13306 signs
General specification for tractor and machine painting of agriculture and forestry
Technical conditions for grain planter
JB/T 8574 agricultural machinery product model rules
JB/T 9832.2 Tractors and machinery of agriculture and forestry - Determination of adhesion of paint films - Compression method
Single grain (precision) seeder technical conditions
Low carbon steel cold rolled strip
Quality Assurance for Wheat No - Till Seeder
3 Terms and definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699-2015Quality carbon structure steels
- GB/T 1243Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 5262Agricultural machinery testing conditions-general rules for measuring methods
- GB/T 5669Rotary tiller - Rotary blades and blade holders
- GB/T 6973Testing methods of single seed drills (precision drills)
Similar standards
Editions of GB/T 20865
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 20865-2017 | No or little-tillage fertilizes-seeder | current edition | Current |
| GB/T 20865-2007 | No or little-tillage fertilizes-seeder | previous edition | Superseded |
This page sells the current edition, GB/T 20865-2017. Earlier editions are listed for reference only.
How to Download GB/T 20865-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
GB/T 1243-2024 — Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
GB/T 12435-2015 — Industrial hexogen
Secure payment via Stripe
Payments accepted
GB/T 20865-2017
$235.00