Valid

GB/T 19705-2017Signals and interfaces for hydrometry instruments (English PDF)

水文仪器信号与接口

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 19705-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 19705-2017 is the English-translated version of 水文仪器信号与接口.

GB/T 19705-2017 defines the signals and interfaces used between hydrological instruments and their sensors, the display, recording and data transmission equipment, and other automation systems.

It covers definitions, the classification of signals and interfaces, technical requirements and test methods.

The requirements deal with sensors such as rotor current meters, tipping bucket rain gauges, float water level gauges, telemetry evaporation gauges and hydrometric cableway equipment, with display, recording and data transmission equipment, and with I/O connectors and pin assignments, while the test methods include an interchangeability test.

It applies to the sensors, display and recording equipment, data transmission equipment and automation system equipment of hydrological instruments. Instrument manufacturers and hydrological monitoring agencies use it.

It replaces GB/T 19705-2005, was issued on 1 November 2017 and has applied since 1 May 2018.

Found what you need?

Document preview — GB/T 19705-2017

National Standard of the People's Republic of China

ICS
07.060
Classification
N 93
Replacing
GB/T 19705-2005

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Categories
  • 4.1 Signal Classification
  • 4.2 Interface Category
  • 5 Technical requirements
  • 5.1 General technical requirements
  • 5.2 Sensor Requirements
  • 5.3 Display, recording or data transmission equipment requirements
  • 5.4 I/O interface connector and pin definition requirements
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Interchangeability test
  • Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 19705-2005 "hydrological instrumentation signals and interfaces," compared with GB/T 19705-2005, in addition to editorial repair Change, the main technical content changes are as follows.

--- Modify the normative references;

--- Combined "non-smart sensor" and "smart sensor" as "sensor";

--- Increased rotor-type flow meter (see 5.2.1), tipping bucket rain gauge (see 5.2.2), float level gauge (see 5.2.3), telemetry evaporation (See 5.2.4), interface and signal requirements of hydrographic cable test equipment (see 5.2.5);

--- Added some other sensor interface (see 5.2.6);

--- Increased sensor output signal related content (see 5.2.9,5.2.10);

--- Added "frequency interface" "network interface" "optical interface" (see 5.3.1.1);

--- Added "digital transmission equipment can have a number of relay output interface" (see 5.3.2.4);

--- In the "I/O interface connector and pin definition" (see 5.4) to add a plug-in and pin definition table.

1 Scope

This standard specifies the hydrological instruments and sensors in the display, recording or data transmission equipment and hydrological instruments and other automation systems Preparation of the signal and interface between the definition, classification, technical requirements and test methods.

This standard applies to hydrological instruments in the sensor, display and recording equipment, data transmission equipment and automation system equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 13983 instrumentation basic terminology

GB/T 18522.2 General principles of hydrological instruments - Part 2 - Reference operating conditions

Hydrological equipment terminology and symbols

GB/T 50095 basic hydrological terminology and symbols

IEEE 1394 high-performance serial bus standard (Standard for a high performance serial bus)

3 Terms and definitions

GB/T 13983, GB/T 19677, GB/T 50095 and defined by the following terms and definitions apply to this document.

3.1 Signal

A change in one or more characteristic quantities may be used to represent the physical phenomenon of information. The meaning of the signal specifically refers to the hydrological instrument sensor and significant Show, record or transmit data between devices and between hydrological devices and other automation system equipment.

3.2 Interface

Necessary hardware and accompanying software for communicating between two or more modules (or components, devices). Is a module (or component, device) The common boundary between. The meaning of the interface specifically refers to the hydrological instrument sensor and display, recording or data transmission equipment and hydrological instruments and their The hardware and accompanying software that communicates between his devices (such as a computer).

3.3 Data transmission equipment

Data transmission equipment refers to the equipment that can automatically collect and transmit parameters (or have storage and partial control functions).

4 Categories

4.1 Signal Classification

4.1.1 hydrological instrument signal according to the information flow into the input signal, the output signal. Sensor measurement output signal is displayed, recorded or The input signal of the data transmission equipment.

4.1.2 hydrological instrument signal according to the mechanism of the source is divided into passive on-off signals and active voltage signals, current signals, frequency signals,

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 19705

EditionTitleRevisionStatus
GB/T 19705-2017Signals and interfaces for hydrometry instrumentscurrent editionCurrent
GB/T 19705-2005Signals and interfaces for hydrometry instrumentsprevious editionSuperseded

This page sells the current edition, GB/T 19705-2017. Earlier editions are listed for reference only.

How to Download GB/T 19705-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 19705-2017

$165.00