GB/T 14093.1-2009Environmental technical requirements of machinery products for the warm-damp environments (English PDF)

Foreword

GB/T 14093 "Environmental technical requirements of machinery products" includes the following seven sections.

--- GB/T 14093.1 Environmental technical requirements of machinery products hot and humid environment

--- GB/T 14093.2 Environmental technical requirements of machinery products cold environment

--- GB/T 14093.3 Environmental technical requirements of machinery products high altitude environment

--- GB/T 14093.4 Environmental technical requirements of machinery products for the industrial corrosion environment

--- GB/T 14093.5 Environmental technical requirements of machinery products dry heat environment

--- GB/T 14093.6 Environmental technical requirements of machinery products Marine Environment

--- GB/T 14093.7 Environmental technical requirements of machinery products mine environment

This section GB/T 14093 Part 1.

This Part replaces GB/T 14093.1-1993 "Environmental technical requirements of machinery products with a hot and humid environment."

This section compared with the GB/T 14093.1-1993, with the following modifications.

--- "This standard" be replaced by "this section";

--- The GB/T 14093.1-1993 of Tables 2 to 14 are combined into one table (Table 2).

Appendix A of this section is an informative annex.

This part of the National Electrical and Electronic Products Environmental conditions and environmental tests Standardization Committee (SAC/TC8) and focal points.

This section is drafted. Guangzhou Electric Apparatus Research Institute.

The main drafters of this section. Wu Xueming, Lai Wenjing.

This part of the standard replaces the previous editions as. GB/T 14093.1-1993.

1 Scope

This section provides a hot and humid environment with climate protection type and environmental conditions, test methods, inspection rules of mechanical products, logos, package

Loading, transport, storage and protection requirements. This part is not specified and described by the relevant professional standards should be the product requirements.

This section applies to GB/T 4797.1-2005 provisions of general-purpose machinery "humid" climate zone used. Product category package

Including farm machinery, internal combustion engines, construction machinery, mining machinery, heavy machinery, material handling equipment, petrochemical general machinery, electrical products, instruments,

Machine tools, common parts.

For local climatic conditions comply with the provisions of this part of the place for use in products, technology requirements of this section may also apply.

Note: In the "Asian hot potato" region of mechanical products may require the use of environmental technical requirements in the basic product standards.

This section does not apply to special environmental conditions, chemical corrosion medium, medium risk of explosion and marine, ships, mines and other humid areas exist

By use of the product.

2 Normative references

The following documents contain provisions which, through GB/T 14093 reference in this text, constitute provisions of this part. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2- 2.2007, IDT)

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT)

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db alternating hot and humid (12h + 12h cycle) (IEC 60068-2-30.2005, IDT)

GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test J and guidance. Mould growth (IEC 60068-2-10.2005, IDT)

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt (IEC 60068- 2-11. 1981, IDT)

GB/T 2423.18-2000 Environmental testing for electric and electronic products - Part 2. Tests - Test Kb. Salt mist, cyclic (sodium chloride solution Liquid) (idtIEC 60068-2-52.1996)

GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT)

GB/T 2423.24-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Sa. too on the analogue terrestrial Solar radiation (idtIEC 60068-2-5. 1975)

GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)