GB/T 13965-2010Instrument components - Vocabulary (English PDF)
仪表元器件 术语
Open the GB/T 13965-2010 preview as PDF
This is a limited preview
Buy now to download the full PDF (302 pages)
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 1, 2010
Implementation date
May 1, 2011
Scope
GB/T 13965-2010 is the English-translated version of 仪表元器件 术语.
GB/T 13965-2010 is the Chinese national standard on instrument components - vocabulary, in the field of metrology and measurement. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 1 December 2010 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 May 2011. Classification: ICS 17.020, CCS N05. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Document preview — GB/T 13965-2010
National Standard of the People's Republic of China
- ICS
- 17.020
- Classification
- N05
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- ForewordIII
- 1 Scope1
- Mechanical components 12
- 3 Elastic member22
- 4 Sensor32
- 5 Of electromechanical components, connectors, switches and fuse60
- 6 Meter motor96
- 7 Instrument light source105
- 8 Display device111
- References124
- Index125
- Pinyin index125
Foreword
This standard replaces GB/T 13965-1992 "instrumentation components of the term."
This standard compared with GB/T 13965-1992 main changes are as follows.
a) the structure of the standard has been adjusted, the terminology into terminology and classification performance parameters of the term;
b) In accordance with some new progress in instrumentation technology, the terms are appropriate instrumentation components added.
Hypoid gears hypoidgearpair Hypoid hypoidgear
Curve bevel gear curvedtoothbevelgear
Bevel gear spiralbevelgear
Parallel shaft gears gearpairwithparalelaxes
Cross shaft gears gearpairwithnon-intersectingaxes 2) increased 2.2.
Cumulative pitch deviation accumulatederroroverpitches
Tooth profile shape deviation toothprofileerror
Total helix deviation totalhelixerror
Helix form deviation helixprofileerror 3) increased 3.1.
Constant Spring constantforcespring 4) increased 3.2.
Elastic Creep elasticcreep 5) 4.2.1 added.
Silicon pressure-sensitive resistance element siliconpiezoresistiveforcesensingelement
Diffused silicon force sensing element diffusedsiliconforcesensingelement
Silicon capacitive force sensitive element siliconcapacitiveforcesensingelement
1 Scope
This standard specifies the instruments mechanical element, the elastic element, sensitive components, electromechanical components, electrical instruments, equipment and light display
Name, performance characteristics VII products and other aspects of the terms and definitions.
This standard applies to aspects of the production, use, research and teaching and other instrument components, and as a unified technical term basis.
2 mechanical components
2.1 mechanical components taxonomy terms
2.1.1 Mechanical components mechanicalcomponent
In a stream-based mechanical transformation or information technology systems, having individual functions, mechanical parts or components. It completed. Information
Transfer, conversion, feeling, moving parts bearing guide, showing the value to be measured, recorded, counted, coupling member, and damping, shock absorption, control, compensation And other functions.
2.1.2 Small module gear finemodulegear
Law modulus less than or equal to 1mm gear.
2.1.3 Involute gear involutecylindricalgear
A cylindrical gear tooth profile available its end face is defined by a involute.
2.1.4 Cycloidal gear cycloidalgear
Tooth profile is accurate (or similar) cylindrical gear cycloid shape.
2.1.5 Watch gears watchgear
Also known as the modified cycloid profile gear.
The tooth surface is lower than the cycloid type tooth surface of the cylindrical surface, the inner tooth surfaces cycloid profile.
2.1.6 Spur gears cylindricalgear
Indexing surface of the cylindrical surface of the gear.
2.1.7 Spur Gear spurgear
Also known as spur gears or spur gears.
Cylindrical gear tooth line dividing the cylindrical surface straight bus.
Remaining clauses in the full document
- 3 Elastic member
- 4 Sensor
- 5 Of electromechanical components, connectors, switches and fuse
- 6 Meter motor
- 7 Instrument light source
- 8 Display device
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 302 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 13965
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 13965-2010 | Instrument components - Vocabulary | current edition | Current |
| GB/T 13965-1992 | Instrument componentsvocabulary | previous edition | Superseded |
This page sells the current edition, GB/T 13965-2010. Earlier editions are listed for reference only.
How to Buy GB/T 13965-2010
- 1Add to cart. Click the "Buy GB/T 13965-2010" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 47310-2026 — Determination of total silicon, aluminium, iron, potassium, sodium, calcium, magnesium, manganese, phosphorus, titanium and sulfur in soil - Monochromatic excitation energy dispersive X-ray fluorescence spectrometry
GB/T 47321-2026 — Specification for the warning data exchange of the national emergency early warning dissemination system
GB/T 47293-2026 — Determination of available mercury in soil
Secure payment via Stripe
Payments accepted
GB/T 13965-2010
$2,480.00