GB/T 12763.4-2007Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea water (English PDF)
海洋调查规范 第4部分: 海水化学要素调查
This is a limited preview
Buy now to download the full PDF (69 pages)
Need quotation for your management?
Get a formal quotation for GB/T 12763.4-2007 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
August 13, 2007
Implementation date
February 1, 2008
Scope
GB/T 12763.4-2007 is the English-translated version of 海洋调查规范 第4部分: 海水化学要素调查.
GB/T 12763.4-2007 is the Chinese standard "Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea water".
Its scope clause reads: GB/T 12763 in this section specifies the elements of organizational design seawater chemistry survey, survey implementation of the plan, sample collection and storage Storage, measurement methods, quality assurance and data analysis process.
This section applies to the marine waters of the chemical elements of the investigation investigation. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 12763.4-2007
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A45
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General provisions
- 4.1 Principles survey design requirements
- 4.2 survey plan and organize the implementation of
- 4.3 Quality Assurance and Quality Control Analysis
- 4.4 Sample collection and storage
- 4.5 General requirements for data processing
- 4.6 Survey Report prepared by
- 4.7 archive
- 5 dissolved oxygen (iodometric titration)
- 5.1 Technical Specifications
- 5.2 Method Principle
- 5.3 Reagents and preparation
- 5.4 Instruments and equipment
- 5.5 installed to take water samples, pretreatment and storage
- 5.6 Determination of Step
- 5.7 Calculation
- 5.8 10 arbitration
- 6 pH measurement (pH meter method)
- 6.1 Technical Specifications
- 6.2 Method Principle
- 6.3 Reagents and preparation
- 6.5 installed to take water samples, pretreatment and storage
- 6.6 Determination of Step
- 6.7 Calculation
- 7 Determination of total alkalinity (pH method)
- 7.1 Technical Specifications
- 7.2 Method Principle
- 7.3 Reagents and preparation
- 7.5 installed to take water samples, pretreatment and storage
- 7.6 Determination of Step
- 7.7 Calculation
- 8 activity was measured silicates (silicon-molybdenum blue method)
- 8.1 Technical Specifications
- 8.2 Method Principle
- 8.3 Reagents and preparation
- 8.5 installed to take water samples, pretreatment and storage
- 8.6 Determination of Step
- 8.7 Calculation
- 8.8 15 arbitration
- 9 active phosphate assay (ascorbic acid phosphorus molybdenum blue method)
- 9.1 Technical Specifications
- 9.2 Method Principle
- 9.3 Reagents and preparation
- 9.5 installed to take water samples, pretreatment and storage
- 9.6 Determination of Step
- 9.7 Calculation
- 10 Nitrite (diazo - Azo method)
- 10.1 Technical Specifications
- 10.2 Method Principle
- 10.3 Reagents and preparation
- 10.5 loading and unloading of water samples, pretreatment and storage
- 10.6 Determination of Step
- 10.7 Calculation
- 11 Determination of nitrate (zinc cadmium reduction method)
- 11.1 Technical Specifications
- 11.2 Method Principle
- 11.3 Reagents and preparation
- 11.5 loading and unloading of water samples, pretreatment and storage
- 11.6 Determination of Step
- 11.7 Calculation
- 11.8 Arbitration
- 12 Determination of ammonium salt (sodium hypobromite oxidation)
- 12.1 Technical Specifications
- 12.2 Method Principle
- 12.3 Reagents and preparation
- 12.5 loading and unloading of water samples, pretreatment and storage
- 12.6 Determination of Step
- 12.7 Calculation
- 12.8 arbitration
- 13 Measurement of chloride (silver titration)
- 13.1 Technical Specifications
- 13.2 Method Principle
- 13.3 Reagents and preparation
- 13.5 loading and unloading of water samples, pretreatment and storage
- 13.6 Determination of Step
- 13.7 Calculation
1 Scope
GB/T 12763 in this section specifies the elements of organizational design seawater chemistry survey, survey implementation of the plan, sample collection and storage
Storage, measurement methods, quality assurance and data analysis process.
This section applies to the marine waters of the chemical elements of the investigation investigation.
2 Normative references
The following documents contain provisions which, through GB/T 12763 reference in this text, constitute provisions of this part. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 8170 numerical rounding rules
GB/T 12763.1 specification for oceanographic survey - Part 1. General
GB/T 12763.2 specification for oceanographic survey - Part 2. Marine hydrographic observations
GB/T 12763.7 specification for oceanographic survey - Part 7. Marine survey data exchange
3 Terms and Definitions
The following terms and definitions apply GB/T 12763 in this section.
3.1 DO
Dissolved oxygen in seawater.
Note 1. The unit micromoles per cubic decimeter (µmol/dm3) oxygen atoms.
Note 2. rewrite GB/T 15925, definitions 1.2.20.
3.2
In any given temperature and salinity, dissolved oxygen saturation to a specific concentration in seawater.
3.3
The percentage dissolved oxygen saturation concentration of dissolved oxygen concentration measured at the sample site with water temperature and salinity conditions.
NOTE. rewrite GB/T 15925, definitions 1.2.22.
3.4
Negative hydrogen ion activity in seawater logarithm, namely pH = -lg [alphaH +].
3.5
And the amount of hydrogen ions per unit volume of seawater required to weak acid anions.
Note 1. The unit millimoles per cubic decimeter (mmol/dm3).
Note 2. rewrite GB/T 15925, the definition of 1.2.9.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 69 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 12763.1Specifications for oceanographic survey - Part 1: General
- GB/T 12763.2Specifications for oceanographic survey - Part 2: marine hydrographic observation
- GB/T 12763.7The specifications for oceanographic survey - Part 7: Exchange of oceanographic survey data
GB/T 12763
Cited by
- GB/T 47155-2026Technical specification for artificial reef construction
- GB/T 44468-2024Testing method for intuitive and qualitative analysis of plastic degradation rate under artificially simulated marine environmental conditions
- GB/T 42629.2-2023Code of practice for international seabed area and high seas environmental survey—Part 2: Marine chemical survey
- GB/T 42637-2023Specification for oceanic polymetallic sulfide resources survey
- HY/T 0331-2022Technical specifications for ecological survey and monitor on green tide
- HY/T 0344-2022Determination of seawater trace dissolved reactive phosphorus - Flow analysis, solid phase extraction of phosphomolybdenum blue and spectrophotometric detection
Similar standards
Editions of GB/T 12763.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 12763.4-2007 | Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea water | current edition | Current |
| GB/T 12763.4-1991 | The specification for oceanographic survey observations of chemical parameters in sea water | previous edition | Superseded |
This page sells the current edition, GB/T 12763.4-2007. Earlier editions are listed for reference only.
How to Download GB/T 12763.4-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12763.1-2007 — Specifications for oceanographic survey - Part 1: General
GB/T 12763.10-2007 — Specification for oceanographic survey - Part 10: Submarine topography and geomorphology
GB/T 12763.11-2007 — Specifications for oceanographic survey - Part 11; marine engineering geological investigation
Secure payment via Stripe
Payments accepted
GB/T 12763.4-2007
$950.00