GB/T 11618.2-2008Pipe fittings of copper and copper alloys - Part 2: Fittings of press type (English PDF)
铜管接头 第2部分：卡压式管件
This is a limited preview
Buy now to download the full PDF (29 pages)
Need quotation for your management?
Get a formal quotation for GB/T 11618.2-2008 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 31, 2008
Implementation date
October 1, 2009
Scope
GB/T 11618.2-2008 is the English-translated version of 铜管接头 第2部分：卡压式管件.
GB/T 11618.2-2008 is the Chinese standard "Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type". Its clauses include terms and definitions; classification and marking; requires; test methods; inspection rules; sign; packaging, transportation and storage.
Found what you need?
Document preview — GB/T 11618.2-2008
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 55
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 classification and marking
- 5 requires
- 6 Test methods
- 7 Inspection rules
- 8 sign
- 9 packaging, transportation and storage
- Appendix A (normative) compression fittings with rubber O-ring
- Annex B (informative) brass compression fittings and installation methods
Foreword
GB/T 11618 "brass fittings" is divided into two parts.
--- Part 1. brazed tube;
--- Part 2. compression fittings.
This section GB/T 11618 Part 2.
2 Normative references
GB/T 2040-2008 Copper and copper alloy sheet
GB/T 2059-2008 Copper and copper alloy strip
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test (GB/T 3512-2001, eqv ISO 188:1998)
GB/T 5231-2001 processing of copper and copper alloy chemical composition and shape of the product
GB/T 5720 O-shaped rubber seals - Test methods
GB/T 5721 rubber seal products logo, packaging, transportation and storage of general provisions
GB/T 7306.1-2000 55 ° sealing pipe thread - Part 1. the inner cylindrical thread and taper external thread (eqv ISO 7-1:1994)
GB/T 7759 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set was measured (GB/T 7759-1996, eqv ISO 815:1991)
GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test (GB/T 7762-2003, ISO 1431-1:1989, MOD)
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage
GB/T 12829 vulcanized rubber or thermoplastic rubber small sample (Sample Delft) tear (GB/T 12829-2006, ISO 34-2:1996, IDT)
GB/T 18033-2007 seamless copper pipes and copper pipe
HG/T 3091-2000 rubber seals, drainage and sewerage pipelines - Interface ring material specification
HG/T 3092 gas supply pipes and fittings with rubber seals rubber
YS/T 649-2007 copper and copper alloy extruded rod
"In drinking water equipment and protective materials hygiene and safety evaluation norms" Ministry of Health Health Law Jian Fa (2001) No. 161 annex 2
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 1176-1987Casting copper and copper alloys
- GB/T 1685Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression at ambient and at elevated temperatures
- GB/T 1690Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 531 · GB/T 7759 · HG/T 3092 · " in drinking water, hygiene and safety equipment and protective materials evaluation norms, " the Ministry of Health Health Law Regulatory Commission (2001) 161 annex 2 · "steel ship classification rules, " the China Classification Society 2006 Volume III
Similar standards
Editions of GB/T 11618.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 11618.2-2008 | Pipe fittings of copper and copper alloys - Part 2: Fittings of press type | current edition | Current |
This page sells the current edition, GB/T 11618.2-2008. Earlier editions are listed for reference only.
How to Download GB/T 11618.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12829-2006 — Determination of vulcanized rubber or thermoplastic rubber small sample (sample Delft) tear strength
GB/T 1685.1-2026 — Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 1:Testing at constant temperature
GB/T 1685.2-2019 — Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
Secure payment via Stripe
Payments accepted
GB/T 11618.2-2008
$525.00