CJ/T 421-2013Electronic controller of household gas burning appliances (English PDF)
This is a limited preview
Buy now to download the full PDF (36 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 421-2013 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
February 28, 2013
Implementation date
June 1, 2013
Scope
CJ/T 421-2013 (Electronic controller of household gas burning appliances) is available as an English-translated PDF.
CJ/T 421-2013 is the Chinese standard "Electronic controller of household gas burning appliances".
Its scope clause reads: This Standard specifies terms and definitions, classification, structure, requirements, test methods, inspection rules, designation, installation and operation instructions, packaging, transportation and storage of electric controller (hereinafter referred as the controller) for household gas burning appliances that use urban gas specified in GB/T 13611.
This Standard applies to production and inspection of electric controller for household gas burning appliances.
Found what you need?
Document preview — CJ/T 421-2013
National Standard of the People's Republic of China
- ICS
- 91.140
- Classification
- P 45
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword3
- 1 Scope5
- 2 Normative references5
- 3 Terms and definitions7
- 4 Classification10
- 5 Structure10
- 6 Requirements12
- 7 Test methods13
- 8 Inspection rules19
- 9 Designation, installation and operation instructions21
- 10 Packaging, transportation and storage22
- Annex A (Normative) Functional module of combustion control24
- Annex B (Normative) Combustion product discharge functional module29
- Annex C (Normative) Reset functional module32
- Annex D (Normative) The gas shutoff functional module34
- Annex E (Normative) Temperature control function block36
- functional safety-related systems39
- Annex G (Normative) Electromagnetic compatibility40
- Annex H (Normative) Battery power controller47
- Annex I (Normative) The fault modes of the electric/electronic components50
- Bibliography55
1 Scope
This Standard specifies terms and definitions, classification, structure, requirements, test methods, inspection rules, designation, installation and operation instructions, packaging, transportation and storage of electric controller (hereinafter referred as the controller) for household gas burning appliances that use urban gas specified in GB/T 13611.
This Standard applies to production and inspection of electric controller for household gas burning appliances.
2 Normative references
The articles contained in the following documents have become part of this Standard when they are quoted herein. For the dated documents so quoted, all the modifications (Including all corrections) or revisions made thereafter shall be applicable to this
Standard.
GB/T 191 Packaging - Pictorial marking for handling of goods (GB/T 191-2008, ISO 780.
1997, MOD)
GB/T 2828 (All parts) Sampling procedures for inspection by attributes
GB 4706.1-2005 Household and similar electrical appliances-Safety - Part 1. General requirements (IEC 60335-1. 2004 (Ed4.1), IDT)
GB/T 13611 Classification and essential property of city gas
GB/T 14004 Fixed capacitors for use in electronic equipment - Part 6. Sectional specification fixed metallized polycarbonate film dielectric d.c. capacitors (GB/T 14004-1992, idt IEC 60384-6. 1987)
GB/T 14472 Fixed capacitors for use in electronic equipment - Part 14. Sectional specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (GB/T 14472-1998, idt IEC 60384-14. 1993)
GB 14536.1-2008 Automatic electrical controls for household and similar use - Part 1.
General requirements (IEC 60730-1. 2003 (Ed3.1), IDT)
GB 14536.6-2008 Automatic electrical controls for household and similar use - Particular requirements for automatic electrical burner control systems (IEC 60730-2-5. 2004, IDT)
GB/T 17626.2 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006, IEC 61000-4-2.
2001, IDT)
GB/T 17626.3 Electromagnetic compatibility - Testing and measurement techniques -
Radiated radio-frequency electromagnetic field immunity test (GB/T 17626.3-2006, IEC 61000-4-3. 2002, IDT)
GB/T 17626.4 Electromagnetic compatibility - Testing and measurement techniques -
Electrical fast transient/burst immunity test (GB/T 17626.4-2008, IEC 61000-4-4. 2004,
IDT)
GB/T 17626.5 Electromagnetic compatibility - Testing and measurement techniques -
Surge immunity test (GB/T 17626.5-2008, IEC 61000-4-5. 2005, IDT)
GB/T 17626.6 Electromagnetic compatibility - Testing and measurement techniques -
Immunity to conducted disturbances induced by radio-frequency fields (GB/T 17626.6-2008, IEC 61000-4-6. 2006, IDT)
GB/T 17626.8 Electromagnetic compatibility (EMC) - Part 4-8. Testing and measurement techniques - Power frequency magnetic field immunity test (GB/T 17626.8-2006, IEC 61000-4-8. 2001, IDT)
GB/T 17626.11 Electromagnetic compatibility - Testing and measurement techniques -
Voltage dips, short interruptions and voltage changes immunity tests (GB/T 17626.11-2008, IEC 61000-4-11. 2004, IDT)
GB/T 17626.28 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency immunity test (GB/T 17626.28-2006, IEC 61000-4-28. 2001, IDT)
GB 18802.1 Low-voltage surge protective devices - Part 1. Surge protective devices connected to low-voltage power distribution systems - Requirements and tests (GB 18802.1-2011, IEC 61643-1. 2005, MOD)
GB 19212.7 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 7. Particular requirements and test for safety isolating transformers and power supply units incorporating safety isolating transformers (GB 19212.7-2012, IEC 61558-2-6. 2009, IDT)
GB/T 20438.2-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2. Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2. 2000, IDT)
GB/T 20438.7-2006 Functional safety of electrical/electronic/programmable electron...
GB/T 13611-2018 | GB/T 16411-2008 | CJ/T 513-2018 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 13611Classification and basic characteristics of urban gas
- GB 14536.6-2008Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems
- GB/T 17626.2Electromagnetic compatibility -- Testing and measurement techniques -- Electrostatic discharge immunity test
- GB/T 17626.2-2006Electromagnetic compatibility -- Testing and measurement techniques -- Electrostatic discharge immunity test
ISO 780 · GB/T 2828 · GB 4706.1-2005 · IEC 60335 · GB/T 14004 · IEC 60384 · GB/T 14472 · GB/T 14472-1998 · GB 14536.1-2008 · IEC 60730 · IEC 61000 · GB/T 17626.28 · GB/T 17626.28-2006 · GB 18802.1 · IEC 61643 · IEC 61558 · IEC 61508
How to Download CJ/T 421-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14536.6-2008 — Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems
GB 19212.7-2012 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 7: Particular requirements and test for safety isolating transformers and power supply units incorporating saftey isolating transformers
GB/T 13611-2018 — Classification and basic characteristics of city gas
Secure payment via Stripe
Payments accepted
CJ/T 421-2013
$120.00